The Resource 11th International Fatigue Congress : selected, peer reviewed papers from the 11th International Fatigue Congress 2014, March 2-7, 2014, Melbourne, Australia, edited by Graham Clark and Chun H. Wang
11th International Fatigue Congress : selected, peer reviewed papers from the 11th International Fatigue Congress 2014, March 2-7, 2014, Melbourne, Australia, edited by Graham Clark and Chun H. Wang
Resource Information
The item 11th International Fatigue Congress : selected, peer reviewed papers from the 11th International Fatigue Congress 2014, March 2-7, 2014, Melbourne, Australia, edited by Graham Clark and Chun H. Wang represents a specific, individual, material embodiment of a distinct intellectual or artistic creation found in Missouri University of Science & Technology Library.This item is available to borrow from 1 library branch.
Resource Information
The item 11th International Fatigue Congress : selected, peer reviewed papers from the 11th International Fatigue Congress 2014, March 2-7, 2014, Melbourne, Australia, edited by Graham Clark and Chun H. Wang represents a specific, individual, material embodiment of a distinct intellectual or artistic creation found in Missouri University of Science & Technology Library.
This item is available to borrow from 1 library branch.
- Summary
- Collection of Selected, Peer Reviewed Papers from the 11th International Fatigue Congress 2014, March 2-7, 2014, Melbourne, Australia. The 282 papers are grouped as follows: I. Biomaterials, II. Case Studies and Industrial Applications, III. Case studies, Materials and Processes, IV. Civil and Mining Structures, V. Composites, VI. Corrosion and Fatigue, VII. Crack Closure and Shielding, VIII. Crack Growth Thresholds, IX. Creep-Fatigue, X. Cyclic Deformation and Crack Initiation, XI. Damage Evaluation and Fatigue Design, XII. Damage Tolerance/Aging Aircraft, XIII. Experimental Techniques, XIV
- Language
- eng
- Extent
- 1 online resource (1819 pages)
- Contents
-
- On Thermo-Hydro-Mechanical (THM) Fatigue Damage of Historical Stone BuildingsEffect of Thermal Cycling on the Mechanical Properties of a Continuous Fibre Composite Used for Car Clutch Facings; The Role of Surface Topography on Fatigue Behaviour of Nickel Based Superalloys; Failure Analysis to Blades of Steam Turbines at Normal Conditions of Operations and Resonance; Failure Analysis of Repeat Tooth Breakage of a 40MW Steam Turbine Load Gearbox; III. Case Studies, Materials and Processes; Fatigue of Cold Expanded Open Hole Coupons with Pre-Existing Cracks
- A Fractographic Investigation of a Failed Precombustion Chamber Nozzle from a Large Marine Diesel EngineCase Studies of Fatigue Failures in Defence Aircraft Components; The Influence of Corrosion Pits and Cold Expanded Fastener Holes on the Fatigue Life Aluminium 7075-T651; An Investigation of the Extent of Crack Closure for Crack Growth in an Aluminium Alloy; Effect of Load Spectra and Stress Magnitude on Crack Growth Behavior Variability from Typical Manufacturing Defects; A Brief History of Structural Fatigue Testing at Fishermans Bend Australia
- Fatigue Life Improvement of Laser Clad 7075 Aluminium Alloy by Deep Surface Rolling TechniqueIV. Civil and Mining Structures; Fatigue Assessment of Large Thin-Walled Structures with Initial Distortions; Retrofitting for Fatigue Cracks at Connection between the Main Girder Web and Lateral Girder Flange Using the Bolting-Stop-Hole Method with Attached Plates; A Self-Heating Approach to Characterize Anisotropy Effects in Fatigue Behaviour: Application to a Nineteenth Century Puddled Iron from a French Railway Bridge
- Evaluation of Bonding between High Modulus CFRP Sheet and Steel after Environmental Exposure and Fatigue LoadingImproved Fatigue Life Assessment of Lighting Poles; V. Composites; A Brief Review of Fatigue Strengthening of Metallic Structures in Civil Engineering Using Fibre Reinforced Polymers; Stiffness Based Fatigue Characterisation of CFRP; Fatigue Crack Growth Rate in Mode I of a Carbon Fiber 5HS Weave Composite Laminate Processed via RTM; The Influence of Orthotropy and Taper Angle on the Compressive Strength of Composite Laminates with Scarfed Holes
- Isbn
- 9783038263890
- Label
- 11th International Fatigue Congress : selected, peer reviewed papers from the 11th International Fatigue Congress 2014, March 2-7, 2014, Melbourne, Australia
- Title
- 11th International Fatigue Congress
- Title remainder
- selected, peer reviewed papers from the 11th International Fatigue Congress 2014, March 2-7, 2014, Melbourne, Australia
- Statement of responsibility
- edited by Graham Clark and Chun H. Wang
- Subject
-
- Composite materials -- Fatigue
- Composite materials -- Fatigue -- Congresses
- Conference papers and proceedings
- Conference papers and proceedings
- Conference proceedings
- Electronic books
- Electronic books
- Fracture mechanics
- Fracture mechanics -- Congresses
- Materials -- Fatigue
- Materials -- Fatigue -- Congresses
- TECHNOLOGY & ENGINEERING -- Engineering (General)
- TECHNOLOGY & ENGINEERING -- Reference
- Language
- eng
- Summary
- Collection of Selected, Peer Reviewed Papers from the 11th International Fatigue Congress 2014, March 2-7, 2014, Melbourne, Australia. The 282 papers are grouped as follows: I. Biomaterials, II. Case Studies and Industrial Applications, III. Case studies, Materials and Processes, IV. Civil and Mining Structures, V. Composites, VI. Corrosion and Fatigue, VII. Crack Closure and Shielding, VIII. Crack Growth Thresholds, IX. Creep-Fatigue, X. Cyclic Deformation and Crack Initiation, XI. Damage Evaluation and Fatigue Design, XII. Damage Tolerance/Aging Aircraft, XIII. Experimental Techniques, XIV
- Cataloging source
- E7B
- Dewey number
- 620.1126
- Illustrations
- illustrations
- Index
- index present
- LC call number
- TA418.38
- LC item number
- .E448 2014eb
- Literary form
- non fiction
- http://bibfra.me/vocab/lite/meetingDate
- 2014
- http://bibfra.me/vocab/lite/meetingName
- International Fatigue Congress
- Nature of contents
-
- dictionaries
- bibliography
- http://library.link/vocab/relatedWorkOrContributorName
-
- Clark, Graham
- Wang, Chun H.
- Series statement
- Advanced Materials Research,
- Series volume
- Vols. 891-892
- http://library.link/vocab/subjectName
-
- Materials
- Fracture mechanics
- Composite materials
- TECHNOLOGY & ENGINEERING
- TECHNOLOGY & ENGINEERING
- Composite materials
- Fracture mechanics
- Materials
- Label
- 11th International Fatigue Congress : selected, peer reviewed papers from the 11th International Fatigue Congress 2014, March 2-7, 2014, Melbourne, Australia, edited by Graham Clark and Chun H. Wang
- Bibliography note
- Includes bibliographical references at the end of each chapters and indexes
- Carrier category
- online resource
- Carrier category code
-
- cr
- Carrier MARC source
- rdacarrier
- Color
- multicolored
- Content category
- text
- Content type code
-
- txt
- Content type MARC source
- rdacontent
- Contents
-
- On Thermo-Hydro-Mechanical (THM) Fatigue Damage of Historical Stone BuildingsEffect of Thermal Cycling on the Mechanical Properties of a Continuous Fibre Composite Used for Car Clutch Facings; The Role of Surface Topography on Fatigue Behaviour of Nickel Based Superalloys; Failure Analysis to Blades of Steam Turbines at Normal Conditions of Operations and Resonance; Failure Analysis of Repeat Tooth Breakage of a 40MW Steam Turbine Load Gearbox; III. Case Studies, Materials and Processes; Fatigue of Cold Expanded Open Hole Coupons with Pre-Existing Cracks
- A Fractographic Investigation of a Failed Precombustion Chamber Nozzle from a Large Marine Diesel EngineCase Studies of Fatigue Failures in Defence Aircraft Components; The Influence of Corrosion Pits and Cold Expanded Fastener Holes on the Fatigue Life Aluminium 7075-T651; An Investigation of the Extent of Crack Closure for Crack Growth in an Aluminium Alloy; Effect of Load Spectra and Stress Magnitude on Crack Growth Behavior Variability from Typical Manufacturing Defects; A Brief History of Structural Fatigue Testing at Fishermans Bend Australia
- Fatigue Life Improvement of Laser Clad 7075 Aluminium Alloy by Deep Surface Rolling TechniqueIV. Civil and Mining Structures; Fatigue Assessment of Large Thin-Walled Structures with Initial Distortions; Retrofitting for Fatigue Cracks at Connection between the Main Girder Web and Lateral Girder Flange Using the Bolting-Stop-Hole Method with Attached Plates; A Self-Heating Approach to Characterize Anisotropy Effects in Fatigue Behaviour: Application to a Nineteenth Century Puddled Iron from a French Railway Bridge
- Evaluation of Bonding between High Modulus CFRP Sheet and Steel after Environmental Exposure and Fatigue LoadingImproved Fatigue Life Assessment of Lighting Poles; V. Composites; A Brief Review of Fatigue Strengthening of Metallic Structures in Civil Engineering Using Fibre Reinforced Polymers; Stiffness Based Fatigue Characterisation of CFRP; Fatigue Crack Growth Rate in Mode I of a Carbon Fiber 5HS Weave Composite Laminate Processed via RTM; The Influence of Orthotropy and Taper Angle on the Compressive Strength of Composite Laminates with Scarfed Holes
- Control code
- 880458763
- Dimensions
- unknown
- Extent
- 1 online resource (1819 pages)
- Form of item
- online
- Isbn
- 9783038263890
- Media category
- computer
- Media MARC source
- rdamedia
- Media type code
-
- c
- Other physical details
- illustrations (some color)
- Specific material designation
- remote
- System control number
- (OCoLC)880458763
- Label
- 11th International Fatigue Congress : selected, peer reviewed papers from the 11th International Fatigue Congress 2014, March 2-7, 2014, Melbourne, Australia, edited by Graham Clark and Chun H. Wang
- Bibliography note
- Includes bibliographical references at the end of each chapters and indexes
- Carrier category
- online resource
- Carrier category code
-
- cr
- Carrier MARC source
- rdacarrier
- Color
- multicolored
- Content category
- text
- Content type code
-
- txt
- Content type MARC source
- rdacontent
- Contents
-
- On Thermo-Hydro-Mechanical (THM) Fatigue Damage of Historical Stone BuildingsEffect of Thermal Cycling on the Mechanical Properties of a Continuous Fibre Composite Used for Car Clutch Facings; The Role of Surface Topography on Fatigue Behaviour of Nickel Based Superalloys; Failure Analysis to Blades of Steam Turbines at Normal Conditions of Operations and Resonance; Failure Analysis of Repeat Tooth Breakage of a 40MW Steam Turbine Load Gearbox; III. Case Studies, Materials and Processes; Fatigue of Cold Expanded Open Hole Coupons with Pre-Existing Cracks
- A Fractographic Investigation of a Failed Precombustion Chamber Nozzle from a Large Marine Diesel EngineCase Studies of Fatigue Failures in Defence Aircraft Components; The Influence of Corrosion Pits and Cold Expanded Fastener Holes on the Fatigue Life Aluminium 7075-T651; An Investigation of the Extent of Crack Closure for Crack Growth in an Aluminium Alloy; Effect of Load Spectra and Stress Magnitude on Crack Growth Behavior Variability from Typical Manufacturing Defects; A Brief History of Structural Fatigue Testing at Fishermans Bend Australia
- Fatigue Life Improvement of Laser Clad 7075 Aluminium Alloy by Deep Surface Rolling TechniqueIV. Civil and Mining Structures; Fatigue Assessment of Large Thin-Walled Structures with Initial Distortions; Retrofitting for Fatigue Cracks at Connection between the Main Girder Web and Lateral Girder Flange Using the Bolting-Stop-Hole Method with Attached Plates; A Self-Heating Approach to Characterize Anisotropy Effects in Fatigue Behaviour: Application to a Nineteenth Century Puddled Iron from a French Railway Bridge
- Evaluation of Bonding between High Modulus CFRP Sheet and Steel after Environmental Exposure and Fatigue LoadingImproved Fatigue Life Assessment of Lighting Poles; V. Composites; A Brief Review of Fatigue Strengthening of Metallic Structures in Civil Engineering Using Fibre Reinforced Polymers; Stiffness Based Fatigue Characterisation of CFRP; Fatigue Crack Growth Rate in Mode I of a Carbon Fiber 5HS Weave Composite Laminate Processed via RTM; The Influence of Orthotropy and Taper Angle on the Compressive Strength of Composite Laminates with Scarfed Holes
- Control code
- 880458763
- Dimensions
- unknown
- Extent
- 1 online resource (1819 pages)
- Form of item
- online
- Isbn
- 9783038263890
- Media category
- computer
- Media MARC source
- rdamedia
- Media type code
-
- c
- Other physical details
- illustrations (some color)
- Specific material designation
- remote
- System control number
- (OCoLC)880458763
Subject
- Composite materials -- Fatigue
- Composite materials -- Fatigue -- Congresses
- Conference papers and proceedings
- Conference papers and proceedings
- Conference proceedings
- Electronic books
- Electronic books
- Fracture mechanics
- Fracture mechanics -- Congresses
- Materials -- Fatigue
- Materials -- Fatigue -- Congresses
- TECHNOLOGY & ENGINEERING -- Engineering (General)
- TECHNOLOGY & ENGINEERING -- Reference
Genre
Member of
Library Links
Embed
Settings
Select options that apply then copy and paste the RDF/HTML data fragment to include in your application
Embed this data in a secure (HTTPS) page:
Layout options:
Include data citation:
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.mst.edu/portal/11th-International-Fatigue-Congress--selected/mKsiaa7Q0iE/" typeof="Book http://bibfra.me/vocab/lite/Item"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.mst.edu/portal/11th-International-Fatigue-Congress--selected/mKsiaa7Q0iE/">11th International Fatigue Congress : selected, peer reviewed papers from the 11th International Fatigue Congress 2014, March 2-7, 2014, Melbourne, Australia, edited by Graham Clark and Chun H. Wang</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.mst.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.mst.edu/">Missouri University of Science & Technology Library</a></span></span></span></span></div>
Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements
Preview
Cite Data - Experimental
Data Citation of the Item 11th International Fatigue Congress : selected, peer reviewed papers from the 11th International Fatigue Congress 2014, March 2-7, 2014, Melbourne, Australia, edited by Graham Clark and Chun H. Wang
Copy and paste the following RDF/HTML data fragment to cite this resource
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.mst.edu/portal/11th-International-Fatigue-Congress--selected/mKsiaa7Q0iE/" typeof="Book http://bibfra.me/vocab/lite/Item"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.mst.edu/portal/11th-International-Fatigue-Congress--selected/mKsiaa7Q0iE/">11th International Fatigue Congress : selected, peer reviewed papers from the 11th International Fatigue Congress 2014, March 2-7, 2014, Melbourne, Australia, edited by Graham Clark and Chun H. Wang</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.mst.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.mst.edu/">Missouri University of Science & Technology Library</a></span></span></span></span></div>
