The Resource Evaluation of methods for analysis of multi-degree-of-freedom systems with damping, by Brij. R. Mohta, (electronic resource)
Evaluation of methods for analysis of multi-degree-of-freedom systems with damping, by Brij. R. Mohta, (electronic resource)
Resource Information
The item Evaluation of methods for analysis of multi-degree-of-freedom systems with damping, by Brij. R. Mohta, (electronic resource) represents a specific, individual, material embodiment of a distinct intellectual or artistic creation found in Missouri University of Science & Technology Library.This item is available to borrow from all library branches.
Resource Information
The item Evaluation of methods for analysis of multi-degree-of-freedom systems with damping, by Brij. R. Mohta, (electronic resource) represents a specific, individual, material embodiment of a distinct intellectual or artistic creation found in Missouri University of Science & Technology Library.
This item is available to borrow from all library branches.
- Summary
- "A general review of various methods for studying the behavior of linear lumped parameter systems with viscous damping is presented. Five methods are discussed. These are: (1) Normal Mode Technique (2) Ho's Method (3) Impedance Method (4) Graphical Technique (5) A Method for Reducing Degrees-of-freedom. For solution of vibration problems by the Normal Mode Technique, the systems are classified as (1) classically damped or (2) non-classically damped. It is shown that the classically damped systems are relatively easy to solve. For non-classically damped systems, the method proposed by K. A. Foss has been employed. This method is quite complex, but does provide an exact solution in most cases. In Holzer's Method, equations for both undamped and damped systems are derived. A sample table is presented which is employed to solve these equations. Systems having dampers between masses as well as between the masses and ground have been discussed. Also branched systems have been treated. In the Impedance Method, the four-pole parameters of a mass, spring and damper are derived and the formulas for solving tandem and parallel connections are presented. In the Graphical Technique, procedures for arranging the equations of motion in a form suitable for graphical solution are outlined. Application of this method to branched systems is discussed. In the Method for Reducing Degrees-of-Freedom, two problems are presented to illustrate the use of this method. The results obtained have been compared with exact solutions. Advantages and disadvantages of each of these methods are discussed on a comparative basis. A sample problem is solved by all of these methods and the results are compared. Suggestions for further work are mode"--Abstract, p. ii-iii
- Language
- eng
- Extent
- 1 online resource (x, 129 pages)
- Note
-
- Vita
- The entire thesis text is included in file
- Title from title screen of thesis/dissertation PDF file (viewed August 16, 2012)
- Label
- Evaluation of methods for analysis of multi-degree-of-freedom systems with damping
- Title
- Evaluation of methods for analysis of multi-degree-of-freedom systems with damping
- Statement of responsibility
- by Brij. R. Mohta
- Title variation
- Evaluation of methods for analysis of multi degree of freedom systems with damping
- Language
- eng
- Summary
- "A general review of various methods for studying the behavior of linear lumped parameter systems with viscous damping is presented. Five methods are discussed. These are: (1) Normal Mode Technique (2) Ho's Method (3) Impedance Method (4) Graphical Technique (5) A Method for Reducing Degrees-of-freedom. For solution of vibration problems by the Normal Mode Technique, the systems are classified as (1) classically damped or (2) non-classically damped. It is shown that the classically damped systems are relatively easy to solve. For non-classically damped systems, the method proposed by K. A. Foss has been employed. This method is quite complex, but does provide an exact solution in most cases. In Holzer's Method, equations for both undamped and damped systems are derived. A sample table is presented which is employed to solve these equations. Systems having dampers between masses as well as between the masses and ground have been discussed. Also branched systems have been treated. In the Impedance Method, the four-pole parameters of a mass, spring and damper are derived and the formulas for solving tandem and parallel connections are presented. In the Graphical Technique, procedures for arranging the equations of motion in a form suitable for graphical solution are outlined. Application of this method to branched systems is discussed. In the Method for Reducing Degrees-of-Freedom, two problems are presented to illustrate the use of this method. The results obtained have been compared with exact solutions. Advantages and disadvantages of each of these methods are discussed on a comparative basis. A sample problem is solved by all of these methods and the results are compared. Suggestions for further work are mode"--Abstract, p. ii-iii
- Cataloging source
- UMR
- http://library.link/vocab/creatorDate
- 1942-
- http://library.link/vocab/creatorName
- Mohta, Brij. R.
- Degree
- M.S.
- Dissertation year
- 1968.
- Granting institution
- University of Missouri at Rolla
- Illustrations
- illustrations
- Index
- no index present
- Literary form
- non fiction
- Nature of contents
-
- dictionaries
- bibliography
- theses
- http://library.link/vocab/subjectName
-
- Damping (Mechanics)
- Degree of freedom
- Equations of motion
- Target audience
- specialized
- Label
- Evaluation of methods for analysis of multi-degree-of-freedom systems with damping, by Brij. R. Mohta, (electronic resource)
- Note
-
- Vita
- The entire thesis text is included in file
- Title from title screen of thesis/dissertation PDF file (viewed August 16, 2012)
- Bibliography note
- Includes bibliographical references (pages 83-84)
- Carrier category
- online resource
- Carrier category code
-
- cr
- Carrier MARC source
- rdacarrier
- Color
- black and white
- Content category
- text
- Content type code
-
- txt
- Content type MARC source
- rdacontent
- Control code
- 806315481
- Dimensions
- unknown
- Extent
- 1 online resource (x, 129 pages)
- Form of item
- electronic
- Media category
- computer
- Media MARC source
- rdamedia
- Media type code
-
- c
- Other physical details
- illustrations, digital, PDF file.
- Specific material designation
- remote
- System control number
- (OCoLC)806315481
- System details
-
- System requirements: Adobe Acrobat Reader; Internet browser
- Mode of access: World Wide Web
- Label
- Evaluation of methods for analysis of multi-degree-of-freedom systems with damping, by Brij. R. Mohta, (electronic resource)
- Note
-
- Vita
- The entire thesis text is included in file
- Title from title screen of thesis/dissertation PDF file (viewed August 16, 2012)
- Bibliography note
- Includes bibliographical references (pages 83-84)
- Carrier category
- online resource
- Carrier category code
-
- cr
- Carrier MARC source
- rdacarrier
- Color
- black and white
- Content category
- text
- Content type code
-
- txt
- Content type MARC source
- rdacontent
- Control code
- 806315481
- Dimensions
- unknown
- Extent
- 1 online resource (x, 129 pages)
- Form of item
- electronic
- Media category
- computer
- Media MARC source
- rdamedia
- Media type code
-
- c
- Other physical details
- illustrations, digital, PDF file.
- Specific material designation
- remote
- System control number
- (OCoLC)806315481
- System details
-
- System requirements: Adobe Acrobat Reader; Internet browser
- Mode of access: World Wide Web
Library Links
Embed
Settings
Select options that apply then copy and paste the RDF/HTML data fragment to include in your application
Embed this data in a secure (HTTPS) page:
Layout options:
Include data citation:
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.mst.edu/portal/Evaluation-of-methods-for-analysis-of/sfd9MYYfdNo/" typeof="Book http://bibfra.me/vocab/lite/Item"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.mst.edu/portal/Evaluation-of-methods-for-analysis-of/sfd9MYYfdNo/">Evaluation of methods for analysis of multi-degree-of-freedom systems with damping, by Brij. R. Mohta, (electronic resource)</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.mst.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.mst.edu/">Missouri University of Science & Technology Library</a></span></span></span></span></div>
Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements
Preview
Cite Data - Experimental
Data Citation of the Item Evaluation of methods for analysis of multi-degree-of-freedom systems with damping, by Brij. R. Mohta, (electronic resource)
Copy and paste the following RDF/HTML data fragment to cite this resource
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.mst.edu/portal/Evaluation-of-methods-for-analysis-of/sfd9MYYfdNo/" typeof="Book http://bibfra.me/vocab/lite/Item"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.mst.edu/portal/Evaluation-of-methods-for-analysis-of/sfd9MYYfdNo/">Evaluation of methods for analysis of multi-degree-of-freedom systems with damping, by Brij. R. Mohta, (electronic resource)</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.mst.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.mst.edu/">Missouri University of Science & Technology Library</a></span></span></span></span></div>
