The Resource Laser surface modification of biomaterials : techniques and applications, edited by Rui Vilar
Laser surface modification of biomaterials : techniques and applications, edited by Rui Vilar
Resource Information
The item Laser surface modification of biomaterials : techniques and applications, edited by Rui Vilar represents a specific, individual, material embodiment of a distinct intellectual or artistic creation found in Missouri University of Science & Technology Library.This item is available to borrow from 1 library branch.
Resource Information
The item Laser surface modification of biomaterials : techniques and applications, edited by Rui Vilar represents a specific, individual, material embodiment of a distinct intellectual or artistic creation found in Missouri University of Science & Technology Library.
This item is available to borrow from 1 library branch.
- Extent
- 1 online resource.
- Note
- Includes index
- Contents
-
- Front Cover; Laser Surface Modification of Biomaterials; Related titles; Laser Surface Modification of Biomaterials; Copyright; Contents; List of contributors; Woodhead Publishing Series in Biomaterials; One -- Techniques and considerations for laser surface modification of biomaterials; 1 -- High precision patterning of biomaterials using the direct laser interference patterning technology; 1.1 Introduction; 1.2 Influence of micro-/nanotopographies on biological behavior; 1.2.1 Cellular behavior; 1.2.2 Bacterial adhesion; 1.3 Direct laser interference patterning
- 1.3.1 Basic principle and optical configurations1.3.2 Technological development of direct laser interference patterning; 1.4 Patterning of biomaterials using direct laser interference patterning; 1.4.1 Material interactions with short-pulsed laser radiation; 1.4.2 Laser interference patterning of medically relevant materials; 1.4.3 Biological behavior of direct laser interference patterned materials; 1.5 Conclusion; References; 2 -- Laser surface treatment of biomedical alloys; 2.1 Introduction: scope of this chapter; 2.2 Laser surface treatment processes
- 2.2.1 Laser surface melting and alloying2.2.2 Laser cladding; 2.2.2.1 Laser cladding with preplaced powder; 2.2.2.2 Laser cladding with material injection; 2.3 Microstructure and phase transformations in laser-treated materials; 2.3.1 Solidification; 2.3.2 Solid-state transformations; 2.4 Applications; 2.4.1 Laser surface treatment of steels; 2.4.1.1 Laser surface alloying to produce stainless steel analogues; 2.4.1.2 Laser surface melting of austenitic and duplex stainless steels; 2.4.1.3 Laser surface alloying of austenitic stainless steels; 2.4.1.4 Laser cladding with stainless steel
- 2.4.2 Laser surface treatment of Ti alloys2.4.2.1 Laser surface melting; 2.4.2.2 Laser surface alloying; 2.4.2.3 Laser cladding; 2.4.3 Laser surface treatment of CoCrMo alloys; 2.4.4 Laser surface treatment of Ni-Ti alloys; 2.4.5 Laser deposition of bioceramic coatings; 2.5 Conclusions; References; 3 -- Laser thin films deposition and characterization for biomedical applications; 3.1 Introduction; 3.1.1 Biomaterial surface functionalization; 3.1.2 Biomimetic thin films grown by laser; 3.2 Pulsed laser techniques used for the synthesis of biomaterial thin films; 3.2.1 Pulsed laser deposition
- 3.2.2 Matrix-assisted pulsed laser evaporation3.3 Characterization methods of laser surface modified biomaterials; 3.3.1 Morphological, compositional, structural, mechanical, and biological characterization of pulsed laser synthesized films; 3.3.1.1 Morphology; Scanning electron microscopy coupled with energy dispersive spectroscopy; Bioglass thin films deposited on Ti (BG/Ti) substrates Gyorgy et al. (2007) observed by SEM that the surface morphology of the B ..
- Isbn
- 9780081009420
- Label
- Laser surface modification of biomaterials : techniques and applications
- Title
- Laser surface modification of biomaterials
- Title remainder
- techniques and applications
- Statement of responsibility
- edited by Rui Vilar
- Subject
-
- MEDICAL / Osteopathy
- Biomedical materials
- Biomedical materials
- Electronic books
- HEALTH & FITNESS / Holism
- HEALTH & FITNESS / Reference
- Lasers -- Industrial applications
- Lasers -- Industrial applications
- MEDICAL / Alternative Medicine
- MEDICAL / Atlases
- MEDICAL / Essays
- MEDICAL / Family & General Practice
- MEDICAL / Holistic Medicine
- Language
- eng
- Cataloging source
- N$T
- Dewey number
- 610.28
- Index
- index present
- LC call number
- R857.M3
- Literary form
- non fiction
- Nature of contents
- dictionaries
- http://library.link/vocab/relatedWorkOrContributorName
- Vilar, Rui
- Series statement
- Woodhead Publishing series in biomaterials
- Series volume
- no. 111
- http://library.link/vocab/subjectName
-
- Biomedical materials
- Lasers
- HEALTH & FITNESS / Holism
- HEALTH & FITNESS / Reference
- MEDICAL / Alternative Medicine
- MEDICAL / Atlases
- MEDICAL / Essays
- MEDICAL / Family & General Practice
- MEDICAL / Holistic Medicine
- MEDICAL / Osteopathy
- Biomedical materials
- Lasers
- Label
- Laser surface modification of biomaterials : techniques and applications, edited by Rui Vilar
- Note
- Includes index
- Antecedent source
- unknown
- Carrier category
- online resource
- Carrier category code
-
- cr
- Carrier MARC source
- rdacarrier
- Color
- multicolored
- Content category
- text
- Content type code
-
- txt
- Content type MARC source
- rdacontent
- Contents
-
- Front Cover; Laser Surface Modification of Biomaterials; Related titles; Laser Surface Modification of Biomaterials; Copyright; Contents; List of contributors; Woodhead Publishing Series in Biomaterials; One -- Techniques and considerations for laser surface modification of biomaterials; 1 -- High precision patterning of biomaterials using the direct laser interference patterning technology; 1.1 Introduction; 1.2 Influence of micro-/nanotopographies on biological behavior; 1.2.1 Cellular behavior; 1.2.2 Bacterial adhesion; 1.3 Direct laser interference patterning
- 1.3.1 Basic principle and optical configurations1.3.2 Technological development of direct laser interference patterning; 1.4 Patterning of biomaterials using direct laser interference patterning; 1.4.1 Material interactions with short-pulsed laser radiation; 1.4.2 Laser interference patterning of medically relevant materials; 1.4.3 Biological behavior of direct laser interference patterned materials; 1.5 Conclusion; References; 2 -- Laser surface treatment of biomedical alloys; 2.1 Introduction: scope of this chapter; 2.2 Laser surface treatment processes
- 2.2.1 Laser surface melting and alloying2.2.2 Laser cladding; 2.2.2.1 Laser cladding with preplaced powder; 2.2.2.2 Laser cladding with material injection; 2.3 Microstructure and phase transformations in laser-treated materials; 2.3.1 Solidification; 2.3.2 Solid-state transformations; 2.4 Applications; 2.4.1 Laser surface treatment of steels; 2.4.1.1 Laser surface alloying to produce stainless steel analogues; 2.4.1.2 Laser surface melting of austenitic and duplex stainless steels; 2.4.1.3 Laser surface alloying of austenitic stainless steels; 2.4.1.4 Laser cladding with stainless steel
- 2.4.2 Laser surface treatment of Ti alloys2.4.2.1 Laser surface melting; 2.4.2.2 Laser surface alloying; 2.4.2.3 Laser cladding; 2.4.3 Laser surface treatment of CoCrMo alloys; 2.4.4 Laser surface treatment of Ni-Ti alloys; 2.4.5 Laser deposition of bioceramic coatings; 2.5 Conclusions; References; 3 -- Laser thin films deposition and characterization for biomedical applications; 3.1 Introduction; 3.1.1 Biomaterial surface functionalization; 3.1.2 Biomimetic thin films grown by laser; 3.2 Pulsed laser techniques used for the synthesis of biomaterial thin films; 3.2.1 Pulsed laser deposition
- 3.2.2 Matrix-assisted pulsed laser evaporation3.3 Characterization methods of laser surface modified biomaterials; 3.3.1 Morphological, compositional, structural, mechanical, and biological characterization of pulsed laser synthesized films; 3.3.1.1 Morphology; Scanning electron microscopy coupled with energy dispersive spectroscopy; Bioglass thin films deposited on Ti (BG/Ti) substrates Gyorgy et al. (2007) observed by SEM that the surface morphology of the B ..
- Control code
- 946997808
- Dimensions
- unknown
- Extent
- 1 online resource.
- File format
- unknown
- Form of item
- online
- Isbn
- 9780081009420
- Level of compression
- unknown
- Media category
- computer
- Media MARC source
- rdamedia
- Media type code
-
- c
- http://library.link/vocab/ext/overdrive/overdriveId
- 9780081009420
- Quality assurance targets
- not applicable
- Reformatting quality
- unknown
- Sound
- unknown sound
- Specific material designation
- remote
- System control number
- (OCoLC)946997808
- Label
- Laser surface modification of biomaterials : techniques and applications, edited by Rui Vilar
- Note
- Includes index
- Antecedent source
- unknown
- Carrier category
- online resource
- Carrier category code
-
- cr
- Carrier MARC source
- rdacarrier
- Color
- multicolored
- Content category
- text
- Content type code
-
- txt
- Content type MARC source
- rdacontent
- Contents
-
- Front Cover; Laser Surface Modification of Biomaterials; Related titles; Laser Surface Modification of Biomaterials; Copyright; Contents; List of contributors; Woodhead Publishing Series in Biomaterials; One -- Techniques and considerations for laser surface modification of biomaterials; 1 -- High precision patterning of biomaterials using the direct laser interference patterning technology; 1.1 Introduction; 1.2 Influence of micro-/nanotopographies on biological behavior; 1.2.1 Cellular behavior; 1.2.2 Bacterial adhesion; 1.3 Direct laser interference patterning
- 1.3.1 Basic principle and optical configurations1.3.2 Technological development of direct laser interference patterning; 1.4 Patterning of biomaterials using direct laser interference patterning; 1.4.1 Material interactions with short-pulsed laser radiation; 1.4.2 Laser interference patterning of medically relevant materials; 1.4.3 Biological behavior of direct laser interference patterned materials; 1.5 Conclusion; References; 2 -- Laser surface treatment of biomedical alloys; 2.1 Introduction: scope of this chapter; 2.2 Laser surface treatment processes
- 2.2.1 Laser surface melting and alloying2.2.2 Laser cladding; 2.2.2.1 Laser cladding with preplaced powder; 2.2.2.2 Laser cladding with material injection; 2.3 Microstructure and phase transformations in laser-treated materials; 2.3.1 Solidification; 2.3.2 Solid-state transformations; 2.4 Applications; 2.4.1 Laser surface treatment of steels; 2.4.1.1 Laser surface alloying to produce stainless steel analogues; 2.4.1.2 Laser surface melting of austenitic and duplex stainless steels; 2.4.1.3 Laser surface alloying of austenitic stainless steels; 2.4.1.4 Laser cladding with stainless steel
- 2.4.2 Laser surface treatment of Ti alloys2.4.2.1 Laser surface melting; 2.4.2.2 Laser surface alloying; 2.4.2.3 Laser cladding; 2.4.3 Laser surface treatment of CoCrMo alloys; 2.4.4 Laser surface treatment of Ni-Ti alloys; 2.4.5 Laser deposition of bioceramic coatings; 2.5 Conclusions; References; 3 -- Laser thin films deposition and characterization for biomedical applications; 3.1 Introduction; 3.1.1 Biomaterial surface functionalization; 3.1.2 Biomimetic thin films grown by laser; 3.2 Pulsed laser techniques used for the synthesis of biomaterial thin films; 3.2.1 Pulsed laser deposition
- 3.2.2 Matrix-assisted pulsed laser evaporation3.3 Characterization methods of laser surface modified biomaterials; 3.3.1 Morphological, compositional, structural, mechanical, and biological characterization of pulsed laser synthesized films; 3.3.1.1 Morphology; Scanning electron microscopy coupled with energy dispersive spectroscopy; Bioglass thin films deposited on Ti (BG/Ti) substrates Gyorgy et al. (2007) observed by SEM that the surface morphology of the B ..
- Control code
- 946997808
- Dimensions
- unknown
- Extent
- 1 online resource.
- File format
- unknown
- Form of item
- online
- Isbn
- 9780081009420
- Level of compression
- unknown
- Media category
- computer
- Media MARC source
- rdamedia
- Media type code
-
- c
- http://library.link/vocab/ext/overdrive/overdriveId
- 9780081009420
- Quality assurance targets
- not applicable
- Reformatting quality
- unknown
- Sound
- unknown sound
- Specific material designation
- remote
- System control number
- (OCoLC)946997808
Subject
- MEDICAL / Osteopathy
- Biomedical materials
- Biomedical materials
- Electronic books
- HEALTH & FITNESS / Holism
- HEALTH & FITNESS / Reference
- Lasers -- Industrial applications
- Lasers -- Industrial applications
- MEDICAL / Alternative Medicine
- MEDICAL / Atlases
- MEDICAL / Essays
- MEDICAL / Family & General Practice
- MEDICAL / Holistic Medicine
Genre
Member of
Library Links
Embed
Settings
Select options that apply then copy and paste the RDF/HTML data fragment to include in your application
Embed this data in a secure (HTTPS) page:
Layout options:
Include data citation:
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.mst.edu/portal/Laser-surface-modification-of-biomaterials-/ZvxOV3b1g_4/" typeof="Book http://bibfra.me/vocab/lite/Item"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.mst.edu/portal/Laser-surface-modification-of-biomaterials-/ZvxOV3b1g_4/">Laser surface modification of biomaterials : techniques and applications, edited by Rui Vilar</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.mst.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.mst.edu/">Missouri University of Science & Technology Library</a></span></span></span></span></div>
Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements
Preview
Cite Data - Experimental
Data Citation of the Item Laser surface modification of biomaterials : techniques and applications, edited by Rui Vilar
Copy and paste the following RDF/HTML data fragment to cite this resource
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.mst.edu/portal/Laser-surface-modification-of-biomaterials-/ZvxOV3b1g_4/" typeof="Book http://bibfra.me/vocab/lite/Item"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.mst.edu/portal/Laser-surface-modification-of-biomaterials-/ZvxOV3b1g_4/">Laser surface modification of biomaterials : techniques and applications, edited by Rui Vilar</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.mst.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.mst.edu/">Missouri University of Science & Technology Library</a></span></span></span></span></div>
