Coverart for item
The Resource Static and dynamic spinal implants : are we evaluating them appropriately?, guest editors, Laura M. Jensen ... [et al.], (electronic resource)

Static and dynamic spinal implants : are we evaluating them appropriately?, guest editors, Laura M. Jensen ... [et al.], (electronic resource)

Label
Static and dynamic spinal implants : are we evaluating them appropriately?
Title
Static and dynamic spinal implants
Title remainder
are we evaluating them appropriately?
Statement of responsibility
guest editors, Laura M. Jensen ... [et al.]
Contributor
Subject
Language
eng
Member of
Cataloging source
DNLM
NLM call number
  • 2013 G-421
  • WE 725
http://library.link/vocab/relatedWorkOrContributorDate
1974-
http://library.link/vocab/relatedWorkOrContributorName
  • Jensen, Laura M.
  • ASTM International
Series statement
JAI
Series volume
STP 1535
http://library.link/vocab/subjectName
  • Spine
  • Device Approval
  • Implants, Experimental
  • Prosthesis Design
Label
Static and dynamic spinal implants : are we evaluating them appropriately?, guest editors, Laura M. Jensen ... [et al.], (electronic resource)
Instantiates
Publication
Bibliography note
Includes bibliographical references and indexes
Contents
  • Kinematic stability evaluation of spinal fusion devices by synthetic FSU model / T. Hansen -- Comparison of two bone surrogates for interbody device subsidence testing / A. K. Aiyangar ... [et al.] -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? / W. Metheny -- Comparison of daily motion of the cervical and lumbar spine to ASTM F2423-11 and ISO 18192-1.2011 standard testing / D. Cobian ... [et al.] -- Wear simulation of total disc arthroplasties : sensitivity to device design and test parameters / P. Hyde ... [et al.] -- How frequency affects fatigue testing of an artificial disc with a viscoelastic polymer core / R. L. Blice ... [et al.] -- Derivation of clinically relevant boundary conditions suitable for evaluation of chronic impingement of lumbar total disk replacement : application to standard development / S. A. Rundell ... [et al.] -- Development of a more physiological loading protocol for spine in vitro flexibility testing / A. Niosi ... [et al.] -- Primary stability of a dynamic artificial disc tested in a human cadaveric model / R. E. Thompson ... [et al.] -- Rationale of a test setup with a defined COR for extra-discal motion-preserving implants with a low implant stiffness / C. Schilling ... [et al.] -- Biomechanical cyclical loading on cadaveric cervical spines in a corpectomy model / B. C. Cheng ... [et al.] -- A method to test anterior-posterior construct shear fatigue based on the vertebrectomy model / M. Jensen and J. M. Dawson -- The use of a single-level construct model to evaluate nontnetallic "flexible" rods / I. Rubfn de la Borbolla ... [et al.] -- Vertebrectomy model for the mechanical assessment of fusionless scoliosis growth rods -- J. P. Shorez -- Static evaluation of pedicle screw spinal constructs to the ASTM standard : a comparison of multiple test laboratories / D. Spenciner -- ASTM F2624-07 : evaluating an alternate fixture for testing extra discal motion preserving implants / C. Anderson and C. J. Lissy -- ASTM F2624 : evaluating alternate fixtures for flexion/extention, lateral bending, and axial rotation testing of extra discal motion preserving implants / C. Anderson and D. A. Lissy -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? Effect of tightening torque on ASTM F1798 axial gripping capacity / S. Vadapalli and D. L. Woods -- Comparison of self-drilling and self-tapping cervical spine screws using ASTM F543-07 / R. J. Konz, L. M. Jensen, and B. L. Kincaid -- Fixture variations when evaluating ASTM F1717 construct stiffness : pin diameter and material -- G. Shah ... [et al.]
  • Kinematic stability evaluation of spinal fusion devices by synthetic FSU model / T. Hansen -- Comparison of two bone surrogates for interbody device subsidence testing / A. K. Aiyangar ... [et al.] -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? / W. Metheny -- Comparison of daily motion of the cervical and lumbar spine to ASTM F2423-11 and ISO 18192-1.2011 standard testing / D. Cobian ... [et al.] -- Wear simulation of total disc arthroplasties : sensitivity to device design and test parameters / P. Hyde ... [et al.] -- How frequency affects fatigue testing of an artificial disc with a viscoelastic polymer core / R. L. Blice ... [et al.] -- Derivation of clinically relevant boundary conditions suitable for evaluation of chronic impingement of lumbar total disk replacement : application to standard development / S. A. Rundell ... [et al.] -- Development of a more physiological loading protocol for spine in vitro flexibility testing / A. Niosi ... [et al.] -- Primary stability of a dynamic artificial disc tested in a human cadaveric model / R. E. Thompson ... [et al.] -- Rationale of a test setup with a defined COR for extra-discal motion-preserving implants with a low implant stiffness / C. Schilling ... [et al.] -- Biomechanical cyclical loading on cadaveric cervical spines in a corpectomy model / B. C. Cheng ... [et al.] -- A method to test anterior-posterior construct shear fatigue based on the vertebrectomy model / M. Jensen and J. M. Dawson -- The use of a single-level construct model to evaluate nontnetallic "flexible" rods / I. Rubfn de la Borbolla ... [et al.] -- Vertebrectomy model for the mechanical assessment of fusionless scoliosis growth rods -- J. P. Shorez -- Static evaluation of pedicle screw spinal constructs to the ASTM standard : a comparison of multiple test laboratories / D. Spenciner -- ASTM F2624-07 : evaluating an alternate fixture for testing extra discal motion preserving implants / C. Anderson and C. J. Lissy -- ASTM F2624 : evaluating alternate fixtures for flexion/extention, lateral bending, and axial rotation testing of extra discal motion preserving implants / C. Anderson and D. A. Lissy -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? Effect of tightening torque on ASTM F1798 axial gripping capacity / S. Vadapalli and D. L. Woods -- Comparison of self-drilling and self-tapping cervical spine screws using ASTM F543-07 / R. J. Konz, L. M. Jensen, and B. L. Kincaid -- Fixture variations when evaluating ASTM F1717 construct stiffness : pin diameter and material -- G. Shah ... [et al.]
  • Kinematic stability evaluation of spinal fusion devices by synthetic FSU model / T. Hansen -- Comparison of two bone surrogates for interbody device subsidence testing / A. K. Aiyangar ... [et al.] -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? / W. Metheny -- Comparison of daily motion of the cervical and lumbar spine to ASTM F2423-11 and ISO 18192-1.2011 standard testing / D. Cobian ... [et al.] -- Wear simulation of total disc arthroplasties : sensitivity to device design and test parameters / P. Hyde ... [et al.] -- How frequency affects fatigue testing of an artificial disc with a viscoelastic polymer core / R. L. Blice ... [et al.] -- Derivation of clinically relevant boundary conditions suitable for evaluation of chronic impingement of lumbar total disk replacement : application to standard development / S. A. Rundell ... [et al.] -- Development of a more physiological loading protocol for spine in vitro flexibility testing / A. Niosi ... [et al.] -- Primary stability of a dynamic artificial disc tested in a human cadaveric model / R. E. Thompson ... [et al.] -- Rationale of a test setup with a defined COR for extra-discal motion-preserving implants with a low implant stiffness / C. Schilling ... [et al.] -- Biomechanical cyclical loading on cadaveric cervical spines in a corpectomy model / B. C. Cheng ... [et al.] -- A method to test anterior-posterior construct shear fatigue based on the vertebrectomy model / M. Jensen and J. M. Dawson -- The use of a single-level construct model to evaluate nontnetallic "flexible" rods / I. Rubfn de la Borbolla ... [et al.] -- Vertebrectomy model for the mechanical assessment of fusionless scoliosis growth rods -- J. P. Shorez -- Static evaluation of pedicle screw spinal constructs to the ASTM standard : a comparison of multiple test laboratories / D. Spenciner -- ASTM F2624-07 : evaluating an alternate fixture for testing extra discal motion preserving implants / C. Anderson and C. J. Lissy -- ASTM F2624 : evaluating alternate fixtures for flexion/extention, lateral bending, and axial rotation testing of extra discal motion preserving implants / C. Anderson and D. A. Lissy -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? Effect of tightening torque on ASTM F1798 axial gripping capacity / S. Vadapalli and D. L. Woods -- Comparison of self-drilling and self-tapping cervical spine screws using ASTM F543-07 / R. J. Konz, L. M. Jensen, and B. L. Kincaid -- Fixture variations when evaluating ASTM F1717 construct stiffness : pin diameter and material -- G. Shah ... [et al.]
  • Kinematic stability evaluation of spinal fusion devices by synthetic FSU model / T. Hansen -- Comparison of two bone surrogates for interbody device subsidence testing / A. K. Aiyangar ... [et al.] -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? / W. Metheny -- Comparison of daily motion of the cervical and lumbar spine to ASTM F2423-11 and ISO 18192-1.2011 standard testing / D. Cobian ... [et al.] -- Wear simulation of total disc arthroplasties : sensitivity to device design and test parameters / P. Hyde ... [et al.] -- How frequency affects fatigue testing of an artificial disc with a viscoelastic polymer core / R. L. Blice ... [et al.] -- Derivation of clinically relevant boundary conditions suitable for evaluation of chronic impingement of lumbar total disk replacement : application to standard development / S. A. Rundell ... [et al.] -- Development of a more physiological loading protocol for spine in vitro flexibility testing / A. Niosi ... [et al.] -- Primary stability of a dynamic artificial disc tested in a human cadaveric model / R. E. Thompson ... [et al.] -- Rationale of a test setup with a defined COR for extra-discal motion-preserving implants with a low implant stiffness / C. Schilling ... [et al.] -- Biomechanical cyclical loading on cadaveric cervical spines in a corpectomy model / B. C. Cheng ... [et al.] -- A method to test anterior-posterior construct shear fatigue based on the vertebrectomy model / M. Jensen and J. M. Dawson -- The use of a single-level construct model to evaluate nontnetallic "flexible" rods / I. Rubfn de la Borbolla ... [et al.] -- Vertebrectomy model for the mechanical assessment of fusionless scoliosis growth rods -- J. P. Shorez -- Static evaluation of pedicle screw spinal constructs to the ASTM standard : a comparison of multiple test laboratories / D. Spenciner -- ASTM F2624-07 : evaluating an alternate fixture for testing extra discal motion preserving implants / C. Anderson and C. J. Lissy -- ASTM F2624 : evaluating alternate fixtures for flexion/extention, lateral bending, and axial rotation testing of extra discal motion preserving implants / C. Anderson and D. A. Lissy -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? Effect of tightening torque on ASTM F1798 axial gripping capacity / S. Vadapalli and D. L. Woods -- Comparison of self-drilling and self-tapping cervical spine screws using ASTM F543-07 / R. J. Konz, L. M. Jensen, and B. L. Kincaid -- Fixture variations when evaluating ASTM F1717 construct stiffness : pin diameter and material -- G. Shah ... [et al.]
  • Kinematic stability evaluation of spinal fusion devices by synthetic FSU model / T. Hansen -- Comparison of two bone surrogates for interbody device subsidence testing / A. K. Aiyangar ... [et al.] -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? / W. Metheny -- Comparison of daily motion of the cervical and lumbar spine to ASTM F2423-11 and ISO 18192-1.2011 standard testing / D. Cobian ... [et al.] -- Wear simulation of total disc arthroplasties : sensitivity to device design and test parameters / P. Hyde ... [et al.] -- How frequency affects fatigue testing of an artificial disc with a viscoelastic polymer core / R. L. Blice ... [et al.] -- Derivation of clinically relevant boundary conditions suitable for evaluation of chronic impingement of lumbar total disk replacement : application to standard development / S. A. Rundell ... [et al.] -- Development of a more physiological loading protocol for spine in vitro flexibility testing / A. Niosi ... [et al.] -- Primary stability of a dynamic artificial disc tested in a human cadaveric model / R. E. Thompson ... [et al.] -- Rationale of a test setup with a defined COR for extra-discal motion-preserving implants with a low implant stiffness / C. Schilling ... [et al.] -- Biomechanical cyclical loading on cadaveric cervical spines in a corpectomy model / B. C. Cheng ... [et al.] -- A method to test anterior-posterior construct shear fatigue based on the vertebrectomy model / M. Jensen and J. M. Dawson -- The use of a single-level construct model to evaluate nontnetallic "flexible" rods / I. Rubfn de la Borbolla ... [et al.] -- Vertebrectomy model for the mechanical assessment of fusionless scoliosis growth rods -- J. P. Shorez -- Static evaluation of pedicle screw spinal constructs to the ASTM standard : a comparison of multiple test laboratories / D. Spenciner -- ASTM F2624-07 : evaluating an alternate fixture for testing extra discal motion preserving implants / C. Anderson and C. J. Lissy -- ASTM F2624 : evaluating alternate fixtures for flexion/extention, lateral bending, and axial rotation testing of extra discal motion preserving implants / C. Anderson and D. A. Lissy -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? Effect of tightening torque on ASTM F1798 axial gripping capacity / S. Vadapalli and D. L. Woods -- Comparison of self-drilling and self-tapping cervical spine screws using ASTM F543-07 / R. J. Konz, L. M. Jensen, and B. L. Kincaid -- Fixture variations when evaluating ASTM F1717 construct stiffness : pin diameter and material -- G. Shah ... [et al.]
Control code
OCM1bookssj0001184387
Dimensions
unknown
Isbn
9780803175211
Lccn
2012013744
Specific material designation
remote
System control number
(WaSeSS)bookssj0001184387
Label
Static and dynamic spinal implants : are we evaluating them appropriately?, guest editors, Laura M. Jensen ... [et al.], (electronic resource)
Publication
Bibliography note
Includes bibliographical references and indexes
Contents
  • Kinematic stability evaluation of spinal fusion devices by synthetic FSU model / T. Hansen -- Comparison of two bone surrogates for interbody device subsidence testing / A. K. Aiyangar ... [et al.] -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? / W. Metheny -- Comparison of daily motion of the cervical and lumbar spine to ASTM F2423-11 and ISO 18192-1.2011 standard testing / D. Cobian ... [et al.] -- Wear simulation of total disc arthroplasties : sensitivity to device design and test parameters / P. Hyde ... [et al.] -- How frequency affects fatigue testing of an artificial disc with a viscoelastic polymer core / R. L. Blice ... [et al.] -- Derivation of clinically relevant boundary conditions suitable for evaluation of chronic impingement of lumbar total disk replacement : application to standard development / S. A. Rundell ... [et al.] -- Development of a more physiological loading protocol for spine in vitro flexibility testing / A. Niosi ... [et al.] -- Primary stability of a dynamic artificial disc tested in a human cadaveric model / R. E. Thompson ... [et al.] -- Rationale of a test setup with a defined COR for extra-discal motion-preserving implants with a low implant stiffness / C. Schilling ... [et al.] -- Biomechanical cyclical loading on cadaveric cervical spines in a corpectomy model / B. C. Cheng ... [et al.] -- A method to test anterior-posterior construct shear fatigue based on the vertebrectomy model / M. Jensen and J. M. Dawson -- The use of a single-level construct model to evaluate nontnetallic "flexible" rods / I. Rubfn de la Borbolla ... [et al.] -- Vertebrectomy model for the mechanical assessment of fusionless scoliosis growth rods -- J. P. Shorez -- Static evaluation of pedicle screw spinal constructs to the ASTM standard : a comparison of multiple test laboratories / D. Spenciner -- ASTM F2624-07 : evaluating an alternate fixture for testing extra discal motion preserving implants / C. Anderson and C. J. Lissy -- ASTM F2624 : evaluating alternate fixtures for flexion/extention, lateral bending, and axial rotation testing of extra discal motion preserving implants / C. Anderson and D. A. Lissy -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? Effect of tightening torque on ASTM F1798 axial gripping capacity / S. Vadapalli and D. L. Woods -- Comparison of self-drilling and self-tapping cervical spine screws using ASTM F543-07 / R. J. Konz, L. M. Jensen, and B. L. Kincaid -- Fixture variations when evaluating ASTM F1717 construct stiffness : pin diameter and material -- G. Shah ... [et al.]
  • Kinematic stability evaluation of spinal fusion devices by synthetic FSU model / T. Hansen -- Comparison of two bone surrogates for interbody device subsidence testing / A. K. Aiyangar ... [et al.] -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? / W. Metheny -- Comparison of daily motion of the cervical and lumbar spine to ASTM F2423-11 and ISO 18192-1.2011 standard testing / D. Cobian ... [et al.] -- Wear simulation of total disc arthroplasties : sensitivity to device design and test parameters / P. Hyde ... [et al.] -- How frequency affects fatigue testing of an artificial disc with a viscoelastic polymer core / R. L. Blice ... [et al.] -- Derivation of clinically relevant boundary conditions suitable for evaluation of chronic impingement of lumbar total disk replacement : application to standard development / S. A. Rundell ... [et al.] -- Development of a more physiological loading protocol for spine in vitro flexibility testing / A. Niosi ... [et al.] -- Primary stability of a dynamic artificial disc tested in a human cadaveric model / R. E. Thompson ... [et al.] -- Rationale of a test setup with a defined COR for extra-discal motion-preserving implants with a low implant stiffness / C. Schilling ... [et al.] -- Biomechanical cyclical loading on cadaveric cervical spines in a corpectomy model / B. C. Cheng ... [et al.] -- A method to test anterior-posterior construct shear fatigue based on the vertebrectomy model / M. Jensen and J. M. Dawson -- The use of a single-level construct model to evaluate nontnetallic "flexible" rods / I. Rubfn de la Borbolla ... [et al.] -- Vertebrectomy model for the mechanical assessment of fusionless scoliosis growth rods -- J. P. Shorez -- Static evaluation of pedicle screw spinal constructs to the ASTM standard : a comparison of multiple test laboratories / D. Spenciner -- ASTM F2624-07 : evaluating an alternate fixture for testing extra discal motion preserving implants / C. Anderson and C. J. Lissy -- ASTM F2624 : evaluating alternate fixtures for flexion/extention, lateral bending, and axial rotation testing of extra discal motion preserving implants / C. Anderson and D. A. Lissy -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? Effect of tightening torque on ASTM F1798 axial gripping capacity / S. Vadapalli and D. L. Woods -- Comparison of self-drilling and self-tapping cervical spine screws using ASTM F543-07 / R. J. Konz, L. M. Jensen, and B. L. Kincaid -- Fixture variations when evaluating ASTM F1717 construct stiffness : pin diameter and material -- G. Shah ... [et al.]
  • Kinematic stability evaluation of spinal fusion devices by synthetic FSU model / T. Hansen -- Comparison of two bone surrogates for interbody device subsidence testing / A. K. Aiyangar ... [et al.] -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? / W. Metheny -- Comparison of daily motion of the cervical and lumbar spine to ASTM F2423-11 and ISO 18192-1.2011 standard testing / D. Cobian ... [et al.] -- Wear simulation of total disc arthroplasties : sensitivity to device design and test parameters / P. Hyde ... [et al.] -- How frequency affects fatigue testing of an artificial disc with a viscoelastic polymer core / R. L. Blice ... [et al.] -- Derivation of clinically relevant boundary conditions suitable for evaluation of chronic impingement of lumbar total disk replacement : application to standard development / S. A. Rundell ... [et al.] -- Development of a more physiological loading protocol for spine in vitro flexibility testing / A. Niosi ... [et al.] -- Primary stability of a dynamic artificial disc tested in a human cadaveric model / R. E. Thompson ... [et al.] -- Rationale of a test setup with a defined COR for extra-discal motion-preserving implants with a low implant stiffness / C. Schilling ... [et al.] -- Biomechanical cyclical loading on cadaveric cervical spines in a corpectomy model / B. C. Cheng ... [et al.] -- A method to test anterior-posterior construct shear fatigue based on the vertebrectomy model / M. Jensen and J. M. Dawson -- The use of a single-level construct model to evaluate nontnetallic "flexible" rods / I. Rubfn de la Borbolla ... [et al.] -- Vertebrectomy model for the mechanical assessment of fusionless scoliosis growth rods -- J. P. Shorez -- Static evaluation of pedicle screw spinal constructs to the ASTM standard : a comparison of multiple test laboratories / D. Spenciner -- ASTM F2624-07 : evaluating an alternate fixture for testing extra discal motion preserving implants / C. Anderson and C. J. Lissy -- ASTM F2624 : evaluating alternate fixtures for flexion/extention, lateral bending, and axial rotation testing of extra discal motion preserving implants / C. Anderson and D. A. Lissy -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? Effect of tightening torque on ASTM F1798 axial gripping capacity / S. Vadapalli and D. L. Woods -- Comparison of self-drilling and self-tapping cervical spine screws using ASTM F543-07 / R. J. Konz, L. M. Jensen, and B. L. Kincaid -- Fixture variations when evaluating ASTM F1717 construct stiffness : pin diameter and material -- G. Shah ... [et al.]
  • Kinematic stability evaluation of spinal fusion devices by synthetic FSU model / T. Hansen -- Comparison of two bone surrogates for interbody device subsidence testing / A. K. Aiyangar ... [et al.] -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? / W. Metheny -- Comparison of daily motion of the cervical and lumbar spine to ASTM F2423-11 and ISO 18192-1.2011 standard testing / D. Cobian ... [et al.] -- Wear simulation of total disc arthroplasties : sensitivity to device design and test parameters / P. Hyde ... [et al.] -- How frequency affects fatigue testing of an artificial disc with a viscoelastic polymer core / R. L. Blice ... [et al.] -- Derivation of clinically relevant boundary conditions suitable for evaluation of chronic impingement of lumbar total disk replacement : application to standard development / S. A. Rundell ... [et al.] -- Development of a more physiological loading protocol for spine in vitro flexibility testing / A. Niosi ... [et al.] -- Primary stability of a dynamic artificial disc tested in a human cadaveric model / R. E. Thompson ... [et al.] -- Rationale of a test setup with a defined COR for extra-discal motion-preserving implants with a low implant stiffness / C. Schilling ... [et al.] -- Biomechanical cyclical loading on cadaveric cervical spines in a corpectomy model / B. C. Cheng ... [et al.] -- A method to test anterior-posterior construct shear fatigue based on the vertebrectomy model / M. Jensen and J. M. Dawson -- The use of a single-level construct model to evaluate nontnetallic "flexible" rods / I. Rubfn de la Borbolla ... [et al.] -- Vertebrectomy model for the mechanical assessment of fusionless scoliosis growth rods -- J. P. Shorez -- Static evaluation of pedicle screw spinal constructs to the ASTM standard : a comparison of multiple test laboratories / D. Spenciner -- ASTM F2624-07 : evaluating an alternate fixture for testing extra discal motion preserving implants / C. Anderson and C. J. Lissy -- ASTM F2624 : evaluating alternate fixtures for flexion/extention, lateral bending, and axial rotation testing of extra discal motion preserving implants / C. Anderson and D. A. Lissy -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? Effect of tightening torque on ASTM F1798 axial gripping capacity / S. Vadapalli and D. L. Woods -- Comparison of self-drilling and self-tapping cervical spine screws using ASTM F543-07 / R. J. Konz, L. M. Jensen, and B. L. Kincaid -- Fixture variations when evaluating ASTM F1717 construct stiffness : pin diameter and material -- G. Shah ... [et al.]
  • Kinematic stability evaluation of spinal fusion devices by synthetic FSU model / T. Hansen -- Comparison of two bone surrogates for interbody device subsidence testing / A. K. Aiyangar ... [et al.] -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? / W. Metheny -- Comparison of daily motion of the cervical and lumbar spine to ASTM F2423-11 and ISO 18192-1.2011 standard testing / D. Cobian ... [et al.] -- Wear simulation of total disc arthroplasties : sensitivity to device design and test parameters / P. Hyde ... [et al.] -- How frequency affects fatigue testing of an artificial disc with a viscoelastic polymer core / R. L. Blice ... [et al.] -- Derivation of clinically relevant boundary conditions suitable for evaluation of chronic impingement of lumbar total disk replacement : application to standard development / S. A. Rundell ... [et al.] -- Development of a more physiological loading protocol for spine in vitro flexibility testing / A. Niosi ... [et al.] -- Primary stability of a dynamic artificial disc tested in a human cadaveric model / R. E. Thompson ... [et al.] -- Rationale of a test setup with a defined COR for extra-discal motion-preserving implants with a low implant stiffness / C. Schilling ... [et al.] -- Biomechanical cyclical loading on cadaveric cervical spines in a corpectomy model / B. C. Cheng ... [et al.] -- A method to test anterior-posterior construct shear fatigue based on the vertebrectomy model / M. Jensen and J. M. Dawson -- The use of a single-level construct model to evaluate nontnetallic "flexible" rods / I. Rubfn de la Borbolla ... [et al.] -- Vertebrectomy model for the mechanical assessment of fusionless scoliosis growth rods -- J. P. Shorez -- Static evaluation of pedicle screw spinal constructs to the ASTM standard : a comparison of multiple test laboratories / D. Spenciner -- ASTM F2624-07 : evaluating an alternate fixture for testing extra discal motion preserving implants / C. Anderson and C. J. Lissy -- ASTM F2624 : evaluating alternate fixtures for flexion/extention, lateral bending, and axial rotation testing of extra discal motion preserving implants / C. Anderson and D. A. Lissy -- Symposium on static and dynamic spinal implants : are we evaluating them appropriately? Effect of tightening torque on ASTM F1798 axial gripping capacity / S. Vadapalli and D. L. Woods -- Comparison of self-drilling and self-tapping cervical spine screws using ASTM F543-07 / R. J. Konz, L. M. Jensen, and B. L. Kincaid -- Fixture variations when evaluating ASTM F1717 construct stiffness : pin diameter and material -- G. Shah ... [et al.]
Control code
OCM1bookssj0001184387
Dimensions
unknown
Isbn
9780803175211
Lccn
2012013744
Specific material designation
remote
System control number
(WaSeSS)bookssj0001184387

Library Locations

    • Curtis Laws Wilson LibraryBorrow it
      400 West 14th Street, Rolla, MO, 65409, US
      37.955220 -91.772210
Processing Feedback ...