IEEE std
Resource Information
The series IEEE std represents a set of related resources, especially of a specified kind, found in Missouri University of Science & Technology Library.
The Resource
IEEE std
Resource Information
The series IEEE std represents a set of related resources, especially of a specified kind, found in Missouri University of Science & Technology Library.
- Label
- IEEE std
566 Items in the Series IEEE std
Context
Context of IEEE stdMembers
No resources found
No enriched resources found
- 1003.1-2001/Cor 1-2001 : standard for information technology : portable operating system interface (POSIX) : technical corrigendum 1
- 1003.1-2001/Cor 2-2004 : standard for information technology : portable operating system interface (POSIX) : technical corrigendum 2
- AC high-voltage circuit breakers rated on a symmetrical current basis : preferred ratings and related required capabilities
- Adoption of ISO/IEC 15288:2002 systems engineering : system life cycle processes
- Advanced library format (ALF) describing integrated circuit (IC) technology, cells and blocks
- Amendment to IEEE standard techniques for high-voltage testing
- American National Standard for high voltage switches, bus supports and accessories schedules of preferred ratings, construction guidelines, and specifications
- American National Standard for performance specification for tritium monitors
- American National Standard for training requirements for homeland security purposes using radiation detection instrumentation for interdiction and prevention
- American National Standard for use of the International System of Units (SI) : the modern metric system
- American National Standard methods of measurement of compatibility between wireless communications devices and hearing aids
- American National Standard pad-mounted equipment-- enclosure integrity
- American national standard : requirements for power-line carrier coupling capacitors and coupling capacitor voltage transformers (CCVT)
- American national standard for calibration of germanium detectors for in-situ gamma-ray measurements
- American national standard for electromagnetic compatibility : radiated emission measurements in electromagnetic interference (EMI) control--calibration of antennas (9 kHz to 40 GHz)
- American national standard for evaluation and performance of radiation detection portal monitors for use in homeland security
- American national standard for methods of measurement of radio-noise emissions from low-voltage electrical and electronic equipment in the range of 9 kHz to 40 GHz
- American national standard for performance specifications for health physics instrumentation--portable instrumentation for use in normal environmental conditions
- American national standard for radiation protection instrumentation test and calibration, portable survey instrumentation for near background operation
- American national standard for switchgear : unit substations--requirements
- American national standard for transformers : underground-type three-phase distribution transformers, 2500 kVA and smaller ; high voltage, 34 500 GrdY/19 920 volts and below ; low voltage, 480 volts and below--requirements
- American national standard for trip devices for AC and general purpose DC low voltage power circuit breakers
- American national standard guide for automated electromagnetic interference measurements
- American national standard guide for construction of open-area test sites for performing radiated emission measurements
- American national standard methods of measurement of the electromagnetic and operational compatibility of unlicensed personal communications services (UPCS) devices
- American national standard minimum performance criteria for active interrogation systems used for homeland security
- American national standard performance criteria for active personnel radiation monitors
- American national standard performance criteria for alarming personal radiation detectors for homeland security
- American national standard performance criteria for hand-held instruments for the detection and identification of radionuclides
- American national standard performance criteria for hand-held instruments for the detection and identification of radionuclides
- American national standard performance criteria for mobile and transportable radiation monitors used for homeland security
- American national standard performance criteria for spectroscopy-based portal monitors used for homeland security
- American national standard performance requirements for spectroscopic personal radiation detectors (SPRDs) for homeland security
- American national standard specifications for power fuses and fuse disconnecting switches
- Artificial intelligence exchange and service tie to all test environments (AI-ESTATE)
- Behavioural languages, Part 5, VITAL ASIC (application specific integrated circuit) modeling specification
- Guide for implementing IEEE Std 1512 using a systems engineering process
- Guide for the understanding of the "A broad-based environment for test (ABBET)" standard
- Health informatics : personal health device communication, Part 10408, Device specialization, thermometer
- Health informatics : personal health device communication, Part 10415, Device specialization, weighing scale
- Health informatics : personal health device communication, Part 10441: device specialization, Cardiovascular fitness and activity monitor
- Health informatics : personal health device communication, Part 10471: device specialization--independent living activity hub
- Health informatics : personal health device communication, Part 20601, Application profile, Optimized Exchange Protocol
- Health informatics : point-of-care medical device communication, Part 30200, Transport profile-- cable connected
- IEEE Recommended practice for measurement and limits of voltage fluctuations and associated light flicker on AC power systems
- IEEE Standard Test Interface Language (STIL) for digital test vector data
- IEEE Standard VHDL analog and mixed-signal extensions
- IEEE Standard for functional modeling language : syntax and semantics for IDEFO
- IEEE Standard for information technology : Standardized Application Environment Profile-- POSIX Realtime Application Support (AEP)
- IEEE Standard for medical device communications : physical layer interface-- cable connected
- IEEE Standard for medical device communications : transport profile-- IrDA based-- cable connected
- IEEE Standard for medical device communications : transport profile-- connection mode-- amendment 1 : corrections and clarifications
- IEEE Standard practices and requirements for semiconductor power rectifier transformers
- IEEE Standard test methods for surge protectors used in low-voltage data, communications, and signaling circuits
- IEEE application guide for AC high-voltage circuit breakers rated on a symmetrical current basis
- IEEE application guide for capacitance current switching for AC high-voltage circuit breakers
- IEEE application guide for transient recovery voltage for AC high-voltage circuit breakers
- IEEE design guide for electric power service systems for generating stations
- IEEE guide : adoption of ISO/IEC 90003:2004--software engineering--guidelines for the application of ISO 9001:2000 to computer software
- IEEE guide adoption of PMI standard : a guide to the project management body of knowledge
- IEEE guide adoption of PMI standard : a guide to the project management body of knowledge
- IEEE guide for AC motor protection
- IEEE guide for CASE tool interconnections : classification and description
- IEEE guide for abnormal frequency protection for power generating plants
- IEEE guide for accelerated aging tests for medium-voltage (5 kV-35 kV) extruded electric power cables using water-filled tanks
- IEEE guide for acceptance and maintenance of insulating oil in equipment
- IEEE guide for acceptance and maintenance of insulating oil in equipment
- IEEE guide for acceptance and maintenance of natural ester fluids in transformers
- IEEE guide for application of composite insulators
- IEEE guide for assessing, monitoring, and mitigating aging effects on class 1E equipment used in nuclear power generating stations--corrigendum 1: thermal aging model corrections
- IEEE guide for automatic reclosing of line circuit breakers for AC distribution and transmission lines
- IEEE guide for breaker failure protection of power circuit breakers
- IEEE guide for cleaning insulators
- IEEE guide for control of hydroelectric power plants
- IEEE guide for design of substation rigid-bus structures
- IEEE guide for determination of hottest-spot temperature in dry-type transformers
- IEEE guide for determination of maximum winding temperature rise in liquid-filled transformers
- IEEE guide for determining fault location on AC transmission and distribution lines
- IEEE guide for determining the effects of high-temperature operation on conductors, connectors, and accessories
- IEEE guide for diagnostic field testing of electric power apparatus : electrical machinery
- IEEE guide for differential and polarizing relay circuit testing
- IEEE guide for digital test interchange format (DTIF) application
- IEEE guide for electric power distribution reliability indices
- IEEE guide for evaluating the effect of solar radiation on outdoor metal-enclosed switchgear
- IEEE guide for fault-locating techniques on shielded power cable systems
- IEEE guide for field testing of shielded power cable systems using very low frequency (VLF)
- IEEE guide for generator ground protection
- IEEE guide for improving the lightning performance of electric power overhead distribution lines
- IEEE guide for in-service use, care, maintenance, and testing of conductive clothing for use on voltages up to 765kV ac and +/- 750kV dc
- IEEE guide for induction machinery maintenance testing and failure analysis
- IEEE guide for information technology-- : system definition-- concept of operations (ConOps) document
- IEEE guide for inspection of overhead transmission line construction
- IEEE guide for installation and maintenance of liquid-immersed power transformers
- IEEE guide for installation, inspection, and testing for class 1E power, instrumentation, and control equipment at nuclear facilities
- IEEE guide for installation, maintenance, and operation of irrigation equipment located near or under power lines
- IEEE guide for investigating and analyzing power cable, joint, and termination failures on systems rated 5 kV through 46 kV
- IEEE guide for loading dry-type distribution and power transformers
- IEEE guide for loading mineral-oil-immersed transformers : corrigendum 1
- IEEE guide for maintenance methods on energized power lines
- IEEE guide for measurement of environmental sensitivities of standard frequency generators
- IEEE guide for measurements of electromagnetic properties of earth media
- IEEE guide for metric conversion of transformer standards
- IEEE guide for monitoring, information exchange, and control of distributed resources interconnected with electric power systems
- IEEE guide for operation and maintenance of turbine generators
- IEEE guide for optimizing the performance and life of lead-acid batteries in remote hybrid power systems
- IEEE guide for partial discharge testing of shielded power cable systems in a field environment
- IEEE guide for performing arc-flash hazard calculations
- IEEE guide for performing arc-flash hazard calculations : amendment 1
- IEEE guide for power system protective relay applications of audio tones over voice grade channels
- IEEE guide for power-line carrier applications
- IEEE guide for protecting power transformers
- IEEE guide for protective grounding of power lines
- IEEE guide for protective relay application to transmission-line series capacitor banks
- IEEE guide for protective relay applications to power transformers
- IEEE guide for safety in the installation of mobile substation equipment
- IEEE guide for selecting and testing jackets for power, instrumentation, and control cables
- IEEE guide for selection and design of aluminum sheaths for power cables
- IEEE guide for selection and use of battery monitoring equipment in stationary applications
- IEEE guide for selection of valve-regulated lead-acid (VRLA) batteries for stationary applications
- IEEE guide for selection, charging, test, and evalution of lead-acid batteries used in stand-alone photovoltaic (PV) systems
- IEEE guide for software quality assurance planning
- IEEE guide for specifying and selecting power, control, and special-purpose cable for petroleum and chemical plants
- IEEE guide for synchronous generator modeling practices and applications in power system stability analyses
- IEEE guide for temporary protective grounding systems used in substations
- IEEE guide for terminology and test methods for analog-to-digital converters
- IEEE guide for terrestrial photovoltaic power system safety
- IEEE guide for test and evaluation of lead-acid batteries used in photovoltaic (PV) hybrid systems
- IEEE guide for testing turn insulation of form-wound stator coils for alternating-current electric machines
- IEEE guide for the application of AC adjustable-speed drives on 2400 to 13800 V auxiliary systems in electric power generating stations
- IEEE guide for the application of component surge-protective devices for use in low-voltage [equal to or less than 1000 V (ac) or 1200 V (dc)] circuits
- IEEE guide for the application of current transformers used for protective relaying purposes
- IEEE guide for the application of faulted circuit indicators for 200 / 600 A, three-phase underground distribution
- IEEE guide for the application of insulation coordination
- IEEE guide for the application of neutral grounding in electrical utility systems, Part I, Introduction
- IEEE guide for the application of protective relays used for abnormal frequency load shedding and restoration
- IEEE guide for the application of separable insulated connectors
- IEEE guide for the application of surge protectors used in low-voltage (equal to or less than 1000 Vrms or 1200 Vdc) data, communications, and signaling circuits
- IEEE guide for the application of surge voltage protective equipment on AC rotating machinery 1000 V and greater
- IEEE guide for the application of surge voltage protective equipment on AC rotating machinery 1000 V and greater, Corrigendum 1: correct table 2, A.1, and A.2
- IEEE guide for the application of surge-protective devices for low-voltage (1000 V or Less) AC power circuits
- IEEE guide for the application of thyristor surge protective devices
- IEEE guide for the application, maintenance, and evaluation of room temperature vulcanizing (RTV) silicone rubber coatings for outdoor ceramic insulators
- IEEE guide for the application, operation, and maintenance of high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories
- IEEE guide for the application, specification, and testing of phase-shifting transformers
- IEEE guide for the commissioning of electrical systems in hydroelectric power plants
- IEEE guide for the definition of reliability program plans for nuclear power generating stations
- IEEE guide for the design and installation of cable systems in substations
- IEEE guide for the detection and location of acoustic emissions from partial discharges in oil-immersed power transformers and reactors
- IEEE guide for the evaluation and reconditioning of liquid immersed power transformers
- IEEE guide for the functional specification of medium voltage (1-35 kV) electronic series devices for compensation of voltage fluctuations
- IEEE guide for the functional specification of transmission static var compensators
- IEEE guide for the operation, classification, application, and coordination of current-limiting fuses with rated voltages 1-38 kV
- IEEE guide for the preparation of excitation system specifications
- IEEE guide for the properties of identifiable jackets for underground power cables and ducts
- IEEE guide for the protection of network transformers
- IEEE guide for the statistical analysis of electrical insulation breakdown data
- IEEE guide for the statistical analysis of electrical insulation breakdown data
- IEEE guide on interactions between power system disturbances and surge-protective devices
- IEEE guide on the surge environment in low-voltage (1000 V and less) AC power circuits
- IEEE guide to the installation of overhead transmission line conductors
- IEEE guide to the installation of overhead transmission line conductors
- IEEE guide to the use of ATLAS specification
- IEEE guide, test procedures for synchronous machines
- IEEE recommended practice : general principles for temperature limits in the rating of electrical equipment and for the evaluation of electrical insulation
- IEEE recommended practice for applying low-voltage circuit breakers used in industrial and commercial power systems
- IEEE recommended practice for applying low-voltage circuit breakers used in industrial and commercial power systems
- IEEE recommended practice for applying low-voltage circuit breakers used in industrial and commercial power systems--corrigendum 1
- IEEE recommended practice for architectural description of software-intensive systems
- IEEE recommended practice for cement plant power distribution
- IEEE recommended practice for communications-based train control (CBTC) system design and functional allocations
- IEEE recommended practice for data communications between remote terminal units and intelligent electronic devices in a substation
- IEEE recommended practice for defining a commonly acceptable musical application using XML
- IEEE recommended practice for determining safe distances from radio frequency transmitting antennas when using electric blasting caps during explosive operations
- IEEE recommended practice for determining the peak spatial-average specific absorption rate (SAR) in the human head from wireless communications devices : measurement techniques
- IEEE recommended practice for determining the peak spatial-average specific absorption rate (SAR) in the human head from wireless communications devices : measurement techniques : amendment 1: CAD file for human head model (SAM Phantom)
- IEEE recommended practice for electric systems in health care facilities
- IEEE recommended practice for electrical installations on shipboard
- IEEE recommended practice for establishing liquid-filled and dry-type power and distribution transformer capability when supplying nonsinusoidal load currents
- IEEE recommended practice for excitation system models for power system stability studies
- IEEE recommended practice for field testing electric submersible pump cable
- IEEE recommended practice for grounding of industrial and commercial power systems
- IEEE recommended practice for high level architecture (HLA) federation development and execution process (FEDEP)
- IEEE recommended practice for inertial sensor test equipment, instrumentation, data acquisition, and analysis
- IEEE recommended practice for information technology : telecommunications and information exchange between systems-- local and metropolitan area networks-- specific requirements, Part 15.2, Coexistence of wireless personal area networks with other wireless devices operating in unlicensed frequency bands
- IEEE recommended practice for installation and maintenance of lead-acid batteries for photovoltaic (PV) systems
- IEEE recommended practice for installation and maintenance of lead-acid batteries for photovoltaic (PV) systems
- IEEE recommended practice for installation and maintenance of nickel-cadmium batteries for photovoltaic (PV) systems
- IEEE recommended practice for installation design and installation of valve-regulated lead-acid storage batteries for stationary applications
- IEEE recommended practice for insulation testing of AC electric machinery (2300 V and above) with high direct voltage
- IEEE recommended practice for internet practices : web page engineering, intranet/extranet applications
- IEEE recommended practice for maintenance, testing, and replacement of valve-regulated lead-acid (VRLA) batteries for stationary applications
- IEEE recommended practice for maintenance, testing, and replacement of vented lead-acid batteries for stationary applications
- IEEE recommended practice for marine cable for use on shipboard and fixed or floating platforms
- IEEE recommended practice for measurement of power factor tip-up of electric machinery stator coil insulation
- IEEE recommended practice for measurements and computations of radio frequency electromagnetic fields with respect to human exposure to such fields, 100 kHz-300 GHz
- IEEE recommended practice for microprocessor-based protection equipment firmware control
- IEEE recommended practice for network communication in electric power substations
- IEEE recommended practice for powering and grounding electronic
- IEEE recommended practice for powering and grounding electronic equipment
- IEEE recommended practice for precision centrifuge testing of linear accelerometers
- IEEE recommended practice for qualification of concentrator photovoltaic (PV) receiver sections and modules
- IEEE recommended practice for radar cross-section test procedures
- IEEE recommended practice for radio frequency safety programs, 3 kHz to 300 GHz
- IEEE recommended practice for seismic design of substations
- IEEE recommended practice for seismic qualification of class 1E equipment for nuclear power generating stations
- IEEE recommended practice for sizing lead-acid batteries for photovoltaic (PV) systems
- IEEE recommended practice for sizing lead-acid batteries for stand-alone photovoltaic (PV) systems
- IEEE recommended practice for sizing nickel-cadmium batteries for stationary applications
- IEEE recommended practice for specifying electric submersible pump cable-- polypropylene insulation
- IEEE recommended practice for stationary battery electrolyte spill containment and management
- IEEE recommended practice for test methods for determination of compatibility of materials with conductive polymeric insulation shields and jackets
- IEEE recommended practice for testing insulation resistance of rotating machinery
- IEEE recommended practice for the Internet : web site engineering, web site management, and web site life cycle
- IEEE recommended practice for the adoption of computer-aided software engineering (CASE) tools
- IEEE recommended practice for the analysis of in-band and adjacent band interference and coexistence between radio systems
- IEEE recommended practice for the application of human factors engineering to systems, equipment, and facilities of nuclear power generating stations and other nuclear facilities
- IEEE recommended practice for the design of DC auxiliary power systems for generating stations
- IEEE recommended practice for the design of flexible buswork located in seismically active areas
- IEEE recommended practice for the design of reliable industrial and commercial power systems
- IEEE recommended practice for the electrical protection of optical fiber communication facilities serving, or connected to electrical supply locations
- IEEE recommended practice for the preparation of test procedures for the thermal evaluation of insulation systems for electric equipment
- IEEE recommended practice for the protection of wire-line communication facilities serving electric supply locations
- IEEE recommended practice for the selection, field testing, and life expectancy of molded case circuit breakers for industrial applications
- IEEE recommended practice for utility interface of photovoltaic (PV) systems
- IEEE recommended practice for verification, validation, and accreditation of a federation : an overlay to the high level architecture federation development and execution process
- IEEE recommended practice on characterization of surges in low-voltage (1000 V and less) AC power circuits
- IEEE recommended practice on software reliability
- IEEE recommended practice on surge testing for equipment connected to low-voltage (1000 V and less) AC power circuits
- IEEE recommended practices to improve electrical maintenance and safety in the cement industry
- IEEE standard VHDL analog and mixed-signal extensions
- IEEE standard VHDL analog and mixed-signal extensions : packages for multiple energy domain support
- IEEE standard VHDL language reference manual
- IEEE standard VHDL language reference manual
- IEEE standard VHDL language reference manual : amendment 1: procedural language application interface
- IEEE standard Verilog hardware description language
- IEEE standard adoption of international standard ISO/IEC 12119: 1994(E) : information technology--software packages--quality requirements and testing
- IEEE standard application of the single-failure criterion to nuclear power generating station safety systems
- IEEE standard classification for software anomalies
- IEEE standard common format for transient data exchange (COMTRADE) for power systems
- IEEE standard communication delivery time performance requirements for electric power substation automation
- IEEE standard conformance test procedures for equipment interconnecting distributed resources with electric power systems
- IEEE standard criteria for accident monitoring instrumentation for nuclear power generating stations
- IEEE standard criteria for accident monitoring instrumentation for nuclear power generating stations : corrigendum 1 : incorporation of user feedback through 2005
- IEEE standard criteria for independence of class 1E equipment and circuits
- IEEE standard criteria for periodic surveillance testing of nuclear power generating station safety systems
- IEEE standard criteria for the design, installation, and qualification of raceway systems for class 1E circuits for nuclear power generating stations
- IEEE standard criteria for the protection of class 1E power systems and equipment in nuclear power generating stations
- IEEE standard definition, specification, and analysis of systems used for supervisory control, data acquisition, and automatic control
- IEEE standard definitions and concepts for dynamic spectrum access : terminology relating to emerging wireless networks, system functionality, and spectrum management
- IEEE standard definitions for excitation systems for synchronous machines
- IEEE standard definitions for use in reporting electric generating unit reliability, availability, and productivity
- IEEE standard design tests for high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories
- IEEE standard dictionary of measures of the software aspects of dependability
- IEEE standard environmental and testing requirements for communications networking devices in electric power substations : amendment 1 : add requirements for altitude and altitude derating factors
- IEEE standard environmental and testing requirements for communications networking devices in electric power substations--corrigendum 1
- IEEE standard facsimile test chart : bi-level (black and white)
- IEEE standard for 4.76 kV to 38 kV rated ground and test devices used in enclosures
- IEEE standard for AC high-voltage circuit switchers rated 15.5 kV through 245 kv
- IEEE standard for CASE tool interconnections : reference model for specifying software behavior
- IEEE standard for Information technology : telecommunications and information exchange between systems-- local and metropolitan area networks-- specific requirements, Part 11 | Amendment 3, Wireless LAN medium access control (MAC) and physical layer (PHY) specifications | 3650-3700 MHz operation in USA
- IEEE standard for Information technology : telecommunications and information exchange between systems-- local and metropolitan area networks-- specific requirements, Part 11, Wireless LAN medium access control (MAC) and physical layer (PHY) specifications : amendment 4 : further higher data rate extension in the 2.4 GHz band
- IEEE standard for Information technology : telecommunications and information exchange between systems-- local and metropolitan area networks-- specific requirements, Part 3, Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications : amendment : data terminal equipment (DTE) power via media dependent interface (MDI)
- IEEE standard for Media Management System (MMS) Drive Management Protocol (DMP)
- IEEE standard for Media Management System (MMS) Library Management Protocol (LMP)
- IEEE standard for Media Management System (MMS) Media Management Protocol (MMP)
- IEEE standard for Media Management System (MMS) Session Security, Authentication, Initialization Protocol (SSAIP)
- IEEE standard for Media Management System (MMS) architecture
- IEEE standard for SCADA and automation systems
- IEEE standard for SystemVerilog--unified hardware design, specification, and verification language
- IEEE standard for VHDL register transfer level (RTL) synthesis
- IEEE standard for VHDL register transfer level (RTL) synthesis
- IEEE standard for Verilog hardware description language
- IEEE standard for Verilog register transfer level synthesis
- IEEE standard for a common mezzanine card (CMC) family
- IEEE standard for a control and status registers (CSR) architecture for microcomputer buses
- IEEE standard for a high performance serial bus : amendment 1
- IEEE standard for a high-performance serial bus
- IEEE standard for a high-performance serial bus : amendment 2
- IEEE standard for a high-performance serial bus : amendment 3
- IEEE standard for a high-performance serial bus peer-to-peer data transport protocol (PPDT)
- IEEE standard for a mixed-signal test bus
- IEEE standard for a precision clock synchronization protocol for networked measurement and control systems
- IEEE standard for a smart transducer interface for sensors and actuators : common functions, communication protocols, and transducer electronic data sheet (TEDS) formats
- IEEE standard for a smart transducer interface for sensors and actuators : digital communication and transducer electronic data (TEDS) formats for distributed multidrop systems
- IEEE standard for a smart transducer interface for sensors and actuators : mixed-mode communication protocols and transducer electronic data sheet (TEDS) formats
- IEEE standard for a smart transducer interface for sensors and actuators : network capable application processor (NCAP) information model
- IEEE standard for a smart transducer interface for sensors and actuators : wireless communication protocols and transducer electronic data sheet (TEDS) formats
- IEEE standard for artificial intelligence exchange and service tie to all test environments (AI-Estate)
- IEEE standard for authenticated encryption with length expansion for storage devices
- IEEE standard for bar coding for distribution transformers and step-voltage regulators
- IEEE standard for boot (initialization configuration) firmware : core requirements and practices
- IEEE standard for boundary-scan testing of advanced digital networks
- IEEE standard for calculating the current-temperature of bare overhead conductors
- IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz
- IEEE standard for common incident management message sets for use by emergency management centers
- IEEE standard for common incident management message sets for use by emergency management centers
- IEEE standard for communication-based train control (CBTC) performance and functional requirements
- IEEE standard for communications protocol aboard trains
- IEEE standard for communications-based train control (CBTC) performance and functional requirements
- IEEE standard for conformance to IEEE 802.16, Part 1, Protocol implementation conformance statement (PICS) proforma for 10-66 GHz wirelessMAN-SC air interface
- IEEE standard for conformance to IEEE 802.16, Part 2, Test suite structure and test purpose for 10-66 GHz wirelessMAN-SC air interface
- IEEE standard for conformance to IEEE 802.16, Part 3, Radio conformance tests (RCT) for 10-66 GHz WirelessMAN-SC air interface
- IEEE standard for conformance to IEEE 802.16, Part 4, Protocol implementation conformance statement (PICS) proforma for frequencies below 11 GHz
- IEEE standard for control switchboards
- IEEE standard for cylindrical-rotor 50 Hz and 60 Hz synchronous generators rated 10 MVA and above
- IEEE standard for data dictionaries for intelligent transportation systems
- IEEE standard for digital test interchange format (DTIF)
- IEEE standard for digitizing waveform recorders
- IEEE standard for electric penetration assemblies in containment structures for nuclear power generating stations
- IEEE standard for electrical and electronic control apparatus on rail vehicles
- IEEE standard for electrical power system device function numbers, acronyms, and contact designations
- IEEE standard for electrical safety practices in electrolytic cell line working zones
- IEEE standard for environmental assessment of personal computer products, including laptop personal computers, desktop personal computers, and personal computer monitors
- IEEE standard for environmental conditions for transit rail car electronic equipment
- IEEE standard for extensions to standard test interface language (STIL) (IEEE Std 1450-1999) for DC level specification
- IEEE standard for extensions to standard test interface language (STIL) (IEEE Std 1450-1999) for semiconductor design environments
- IEEE standard for extensions to standard test interface language (STIL) (IEEE Std 1450-1999) for tester target specification
- IEEE standard for extruded and laminated dielectric shielded cable joints rated 2500 V to 500 000 V
- IEEE standard for fall protection for utility work
- IEEE standard for fault tolerant extensions to the Futurebus+ TM architecture
- IEEE standard for ferroresonant voltage regulators
- IEEE standard for floating-point arithmetic
- IEEE standard for general requirements and test code for oil-immersed HVDC converter transformers
- IEEE standard for hazardous material incident management message sets for use by emergency management centers
- IEEE standard for helically applied fiber optic cable systems (wrap cable) for use on overhead utility lines
- IEEE standard for high-accuracy instrument transformers
- IEEE standard for higher performance protocol for the standard digital interface for programmable instrumentation
- IEEE standard for in-system configuration of programmable devices
- IEEE standard for in-system configuration of programmable devices
- IEEE standard for indoor ac switches (1 kV-38 kV) for use in metal-enclosed switchgear
- IEEE standard for information technology : POSIX Ada language interfaces, Amendment 2. Protocol-independent interfaces, Part 1. Binding for system application interface (API)
- IEEE standard for information technology : Test methods for measuring conformance to POSIX, Part 2, Shell and utilities interfaces
- IEEE standard for information technology : portable operating system interface (POSIX) : Part 1, System application program interface (API) : Amendment 1, Realtime extension [C language]
- IEEE standard for information technology : portable operating system interface (POSIX) : Part 1, System application program interface (API) : Amendment 6, Tracing [C language]
- IEEE standard for information technology : portable operating system interface (POSIX) : Part 1, System application program interface (API) : Amendment d, Additional realtime extensions [C language]
- IEEE standard for information technology : portable operating system interface (POSIX) : Part 1, System application program interface (API) : Amendment j, Advanced realtime extensions [C language]
- IEEE standard for information technology : portable operating system interface (POSIX), Part 26, Device control application program interface (API) [C language]
- IEEE standard for information technology : protocols for distributed interactive simulaton applications, entity informaiton and interaction
- IEEE standard for information technology : standardized Application Environment Profile (AEP)-- POSIX realtime and embedded application support
- IEEE standard for information technology : telecommunications and information exchange between systems : local and metropolitan area networks-- common specifications :, Part 3, Media access control (MAC) bridges : amendment 1
- IEEE standard for information technology : telecommunications and information exchange between systems-- local and metropolitan area networks-- specific requirements, Part 11 | Amendment 1, Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications | Radio resource measurement of wireless LANs
- IEEE standard for information technology : telecommunications and information exchange between systems-- local and metropolitan area networks-- specific requirements, Part 11 | Amendment 2, Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications | Fast basic service set (BSS) transition
- IEEE standard for information technology : telecommunications and information exchange between systems-- local and metropolitan area networks-- specific requirements, Part 11 | Amendment 5, Wireless medium access control (MAC) and physical layer (PHY) specifications | Spectrum and transmit power management extensions in the 5 GHz band in Europe
- IEEE standard for information technology : telecommunications and information exchange between systems-- local and metropolitan area networks-- specific requirements, Part 11 | Amendment 6, Wireless medium access control (MAC) and physical layer (PHY) specifications | Medium access control (MAC) security enhancements
- IEEE standard for information technology : telecommunications and information exchange between systems-- local and metropolitan area networks-- specific requirements, Part 11 | Amendment 7, Wireless LAN medium access control (MAC) and physical layer (PHY) specifications | 4.9 GHz--5 GHz operation in Japan
- IEEE standard for information technology : telecommunications and information exchange between systems-- local and metropolitan area networks-- specific requirements, Part 15.1, Wireless Medium Access Control (MAC) and Physical Layer (PHY) specifications for Wireless Personal Area Networks (WPANs)
- IEEE standard for information technology : telecommunications and information exchange between systems-- local and metropolitan area networks-- specific requirements, Part 15.3, Wireless medium access control (MAC) and physical layer (PHY) specifications for high rate wireless personal area networks (WPANs)
- IEEE standard for information technology : telecommunications and information exchange between systems-- local and metropolitan area networks-- specific requirements, Part 17 : Resilient packet ring (RPR) access method and physical layer specifications, Amendment 1 : Spatially aware sublayer
- IEEE standard for information technology : telecommunications and information exchange between systems-- local and metropolitan area networks-- specific requirements, Part 3 | Amendment, Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications | maintenance 7
- IEEE standard for information technology : telecommunications and information exchange between systems-- local and metropolitan area networks-- specific requirements, Part 3 | Amendment, Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications | physical layer and management parameters for 10Gb/s operation, type 10GBASE-CX4
- IEEE standard for information technology : telecommunications and information exchange between systems--local and metropolitan area networks--specific requirements : Part 3, Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
- IEEE standard for information technology : telecommunications and information exchange between systems--local and metropolitan area networks--specific requirements : Part 3, Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications--Corrigendum 1
- IEEE standard for information technology : telecommunications and information exchange between systems--local and metropolitan area networks--specific requirements, Part 11 | Amendment 8, Wireless medium access control (MAC) and physical layer (PHY) specifications | medium access control (MAC) quality of service enhancements
- IEEE standard for information technology : telecommunications and information exchange between systems--local and metropolitan area networks--specific requirements, Part 15.3 | Amendment 1, Wireless medium access control (MAC) and physical layer (PHY) specifications for high rate wireless personal area networks (WPANs) | MAC Sublayer
- IEEE standard for information technology : telecommunications and information exchange between systems--local and metropolitan area networks--specific requirements, Part 15.4 | Amendment 1, Wireless Medium Access Control (MAC) and Physical Layer (PHY) specifications for Low-Rate Wireless Personal Area Networks (WPANs) | Add alternate PHYs
- IEEE standard for information technology : telecommunications and information exchange between systems--local and metropolitan area networks--specific requirements, Part 15.4, Wireless Medium Access Control (MAC) and Physical Layer (PHY) specifications for Low-Rate Wireless Personal Area Networks (WPANs)
- IEEE standard for information technology : telecommunications and information exchange between systems--local and metropolitan area networks--specific requirements, Part 3 | Amendment 1, Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications | Physical layer and management parameters for 10 Gb/s operation, type 10GBASE-T
- IEEE standard for information technology : telecommunications and information exchange between systems--local and metropolitan area networks--specific requirements, Part 3 | Amendment 4, Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications | Ethernet operation over electrical backplanes
- IEEE standard for information technology : telecommunications and information exchange between systems--local and metropolitan area networks--specific requirements, Part 3 | Amendment, Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications | Media access control parameters, physical layers, and management parameters for subscriber access networks
- IEEE standard for information technology : telecommunications and information exchange between systems--local and metropolitan area networks--specific requirements, Part 3, Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
- IEEE standard for information technology : test methods specifications for measuring conformance to POSIX, Part 1: System application program interface (API) | Amendment 1: Realtime extension (C language)
- IEEE standard for information technology, part 11, wireless LAN medium access control (MAC) and physical layer (PHY) specifications
- IEEE standard for integrated circuit (IC) delay and power calculation system
- IEEE standard for interconnecting distributed resources with electric power systems
- IEEE standard for interface and protocol extensions to IEEE 1284-compliant peripherals and host adapters
- IEEE standard for interrupter switches for alternating current, rated above 1000 volts
- IEEE standard for learning object metadata
- IEEE standard for learning technology : data model for reusable competency definitions
- IEEE standard for learning technology--ECMAScript application programming interface for content to runtime services communication
- IEEE standard for learning technology--extensible markup language (XML) schema binding for data model for content object communication
- IEEE standard for learning technology--extensible markup language (XML) schema definition language binding for learning object metadata
- IEEE standard for letter designations for radar-frequency bands
- IEEE standard for local and metropolitan area networks - Common specifications, Part 3: Media access control (MAC) bridges | Amendment 2: Rapid reconfiguration
- IEEE standard for local and metropolitan area networks : Media access control (MAC) security
- IEEE standard for local and metropolitan area networks : amendment 1 : detailed systems profiles for 10-66 GHz, Part 16, Air interface for fixed broadband wireless access systems
- IEEE standard for local and metropolitan area networks : amendment 1 : management information base, Part 16, Air interface for fixed broadband wireless access systems
- IEEE standard for local and metropolitan area networks : amendment 2 : Medium Access Control Modifications and Additional Physical Layer Specifications for 2-11 GHz, Part 16, Air Interface for Fixed Broadband Wireless Access Systems
- IEEE standard for local and metropolitan area networks : amendment 2 : physical and medium access control layers for combined fixed and mobile operation in licensed bands and corrigendum 1, Part 16, Air interface for fixed and mobile broadband wireless access systems
- IEEE standard for local and metropolitan area networks : media access control (MAC) bridges
- IEEE standard for local and metropolitan area networks : media access control (MAC) bridges, Amendment 1, Bridging of IEEE 802.17
- IEEE standard for local and metropolitan area networks : media access control (MAC) bridges, Amendment 5, Bridging of IEEE 802.16
- IEEE standard for local and metropolitan area networks : overview and architecture
- IEEE standard for local and metropolitan area networks : overview and architecture, Amendment 1, Ethertypes for protoypes and vendor-specific protocol development
- IEEE standard for local and metropolitan area networks : overview and architecture, Amendment 2, Registration of object identifiers
- IEEE standard for local and metropolitan area networks : physical and media access control layer specification, Part 20, Air interface for mobile broadband wireless access systems supporting vehicular mobility
- IEEE standard for local and metropolitan area networks : station and media access control connectivity discovery
- IEEE standard for local and metropolitan area networks : virtual bridged local area networks
- IEEE standard for local and metropolitan area networks : virtual bridged local area networks : amendment 2 : VLAN classication by protocol and port
- IEEE standard for local and metropolitan area networks : virtual bridged local area networks--amendment 5 : connectivity fault management
- IEEE standard for local and metropolitan area networks : virtual bridged local area networks--amendment 7 : multiple registration protocol
- IEEE standard for local and metropolitan area networks : virtual bridged local area networks--corrigendum 1, Corrections to the multiple registration protocol
- IEEE standard for low-voltage DC power circuit breakers used in enclosures
- IEEE standard for measurement methods of emissions from FM and television broadcast receivers in the frequency range of 9 kHz to 40 GHz
- IEEE standard for message sets for vehicle/roadside communications
- IEEE standard for metal-clad switchgear
- IEEE standard for metal-enclosed bus
- IEEE standard for metal-enclosed interrupter switchgear
- IEEE standard for metal-enclosed low-voltage power circuit-breaker switchgear
- IEEE standard for metal-enclosed low-voltage power circuit-breaker switchgear : amendment 1 : short-time and short-circuit withstand current tests-minimum areas for multiple cable connections
- IEEE standard for metal-oxide surge arresters for AC power circuits (] 1 kV) : amendment 1, Short-circuit tests for station, intermediate, and distribution arresters
- IEEE standard for metal-oxide surge arresters for AC power circuits (]1 kV)
- IEEE standard for methods for measuring transmission performance of analog and digital telephone sets, handsets, and headsets : amendment 1
- IEEE standard for methods of measurement of radio-frequency power-line interference filter in the range of 100Hz to 10 GHz
- IEEE standard for modeling and simulation (M & S) high level architecture (HLA) : federate interface specification
- IEEE standard for modeling and simulation (M & S) high level architecture (HLA) : framework and rules
- IEEE standard for modeling and simulation (M & S) high level architecture (HLA) : object model template (OMT) specification
- IEEE standard for module test and maintenance Bus (MTM-Bus) protocol
- IEEE standard for overhead, pad-mounted, dry vault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV
- IEEE standard for overhead-type distribution transformers, 500 kVA and smaller : high voltage, 34 500 V and below ; low voltage, 7970/13 800Y V and below
- IEEE standard for pad-mounted equipment--enclosure integrity
- IEEE standard for parametric data log format
- IEEE standard for passenger train auxiliary power systems interfaces
- IEEE standard for performance of adjustable speed AC drives rated 375 kW and larger
- IEEE standard for petroleum and chemical industry : severe duty totally enclosed fan-cooled (TEFC) squirrel cage induction motors--up to and including 370 kW (500 hp)
- IEEE standard for pole mounted equipment--enclosure integrity
- IEEE standard for preferred power supply (PPS) for nuclear power generating stations
- IEEE standard for public safety traffic incident management message sets for use by emergency management centers
- IEEE standard for qualification of class 1E static battery chargers and inverters for nuclear power generating stations
- IEEE standard for qualification of safety-related actuators for nuclear power generating stations
- IEEE standard for qualifying class 1E electric cables and field splices for nuclear power generating stations
- IEEE standard for qualifying class 1E equipment for nuclear power generating stations
- IEEE standard for qualifying class 1E equipment for nuclear power generating stations
- IEEE standard for qualifying permanent connections used in substation grounding
- IEEE standard for radio-frequency energy and current-flow symbols
- IEEE standard for rail transit vehicle event recorders
- IEEE standard for receiver fixture interface
- IEEE standard for rechargeable batteries for multi-cell mobile computing devices
- IEEE standard for safety levels with respect to human exposure to electromagnetic fields, 0-3kHz
- IEEE standard for safety levels with respect to human exposure to radio frequency electromagnetic fields, 3kHz to 300 GHz
- IEEE standard for safety levels with respect to human exposure to radio frequency electromagnetic fields, 3kHz to 300 GHz
- IEEE standard for safety levels with respect to human exposure to radio frequency electromagnetic fields, 3kHz to 300 GHz, Amendment 2, Specific absorption rate (SAR) limits for the Pinna
- IEEE standard for salient-pole 50 Hz and 60 Hz synchronous generators and generator/motors for hydraulic turbine applications rated 5 MVA and above
- IEEE standard for scalable coherent interface (SCI)
- IEEE standard for shunt power capacitors
- IEEE standard for software and system test documentation
- IEEE standard for software documentation for rail equipment and systems
- IEEE standard for software quality assurance plans
- IEEE standard for software reviews and audits
- IEEE standard for spaceborne fiber-optic data bus
- IEEE standard for standard delay format (SDF) for the electronic design process
- IEEE standard for standard general requirements for liquid-immersed distribution, power, and regulating transformers
- IEEE standard for submersible equipment--enclosure integrity
- IEEE standard for substation intelligent electronic devices (IEDs) cyber security capabilities
- IEEE standard for surge withstand capability (SWC) tests for relays and relay systems associated with electric power apparatus
- IEEE standard for synchrophasors for power systems
- IEEE standard for test methods for the characterization of organic transistors and materials
- IEEE standard for the design and installation of cable systems for class 1E circuits in nuclear power generating stations
- IEEE standard for the design and qualification of class 1E control boards, panels, and racks used in nuclear power generating stations
- IEEE standard for the electronic reporting of transformer test data
- IEEE standard for the functional verification language 'e'
- IEEE standard for the functional verification language e
- IEEE standard for the functioning of and interfaces among propulsion, friction brake, and train-borne master control on rapid transit vehicles
- IEEE standard for the preparation of test procedures for the thermal evaluation of solid electrical insulating materials
- IEEE standard for the testing, design, installation, and maintenance of electrical resistance heat tracing for industrial applications
- IEEE standard for threaded zinc-coated ferrous strand-eye anchor rods and nuts for overhead line construction
- IEEE standard for three-phase, manually operated subsurface and vault load-interrupting switches for alternating-current systems
- IEEE standard for underground type, self-cooled, single-phase, distribution transformers with separable insulated high-voltage connectors ; high voltage 25000 V and below ; low voltage 600 V and below ; 167 kVA and smaller
- IEEE standard for verification of vital functions in processor-based systems used in rail transit control
- IEEE standard for withstand capability of relay systems to radiated electromagnetic interference from transceivers
- IEEE standard for zinc-coated steel bolts and nuts for overhead line construction
- IEEE standard general requirements for dry-type distribution and power transformers including those with solid cast and/or resin-encapsulated windings
- IEEE standard measurement procedure for field disturbance sensors 300 MHz to 40 GHz
- IEEE standard method for measuring the effectiveness of electromagnetic shielding enclosures
- IEEE standard method for measuring transmission performance of handsfree telephone sets
- IEEE standard methods for measuring transmission performance of analog and digital telephone sets, handsets, and headsets
- IEEE standard of common requirements for high-voltage power switchgear rated above 1000V
- IEEE standard of performance and test requirements for instrument transformers of a nominal system voltage of 115 kV and above
- IEEE standard on television : measurement of luminance signal levels
- IEEE standard on transitions, pulses, and related waveforms
- IEEE standard power cable ampacity tables
- IEEE standard practices and requirements for semiconductor power rectifier transformers : amendment 1 : added technical and editorial corrections
- IEEE standard protocol for authentication in host attachments of transient storage devices
- IEEE standard radar definitions
- IEEE standard rating structure for AC high-voltage circuit breakers
- IEEE standard rating structure for ac high-voltage circuit breakers rated on a symmetrical current basis : amendment 1: capacitance current switching
- IEEE standard requirements for conversion of power switchgear equipment
- IEEE standard requirements for high-voltage air switches
- IEEE standard requirements for instrument transformers
- IEEE standard requirements for liquid-immersed distribution substation transformers
- IEEE standard requirements for overhead, pad mounted, dry vault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV-- corrigendum 1
- IEEE standard requirements for pad-mounted, compartmental-type, self-cooled, three-phase distribution transformers (2500 kVA and smaller) : high-voltage, 34 500 GrdY/19 920 volts and below ; low-voltage, 480 volts and below
- IEEE standard requirements for secondary network protectors
- IEEE standard requirements for secondary network protectors
- IEEE standard requirements for secondary network transformers, subway and vault types (liquid immersed)
- IEEE standard requirements for subsurface, vault, and pad-mounted load-interrupter switchgear and fused load-interrupter switchgear for alternating current systems up to 38 kV
- IEEE standard requirements, terminology, and test code for bushings for DC applications--Corrigendum 1
- IEEE standard requirements, terminology, and test code for shunt reactors rated over 500 kVA
- IEEE standard service conditions and definitions for high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories
- IEEE standard specification format guide and test procedure for coriolis vibratory gyros
- IEEE standard specification format guide and test procedure for linear, single-axis, nongyroscopic accelerometers
- IEEE standard specification format guide and test procedure for single-axis laser gyros
- IEEE standard specifications for high-voltage distribution class enclosed single-pole air switches with rated voltages from 1 kV through 8.3 kV
- IEEE standard specifications for high-voltage expulsion, current-limiting, and combination-type distribution and power class external fuses, with rated voltages from 1 kV through 38 kV, used for the protection of shunt capacitors
- IEEE standard specifications for public-key cryptography
- IEEE standard specifications for public-key cryptography, Amendment 1, Additional techniques
- IEEE standard terminology for power and distribution transformers
- IEEE standard test access port and boundary-scan architecture
- IEEE standard test code for dry-type distribution and power transformers
- IEEE standard test code for liquid-immersed distribution, power, and regulating transformers
- IEEE standard test interface language (STIL) for digital test vector data--core test language (CTL)
- IEEE standard test method for use in the evaluation of message communications between intelligent electronic devices in an integrated substation protection, control, and data acquisition system
- IEEE standard test methods for low-voltage gas-tube surge-protective device components
- IEEE standard test procedure for AC high-voltage circuit breakers rated on a symmetrical current basis : Amendment 1: capacitance current switching
- IEEE standard test procedure for AC high-voltage circuit breakers rated on a symmetrical current basis : Corrigendum 1
- IEEE standard test procedure for evaluation of systems of insulation for dry-type specialty and general-purpose transformers
- IEEE standard test procedure for impulse voltage tests on insulated conductors
- IEEE standard test procedure for polyphase induction motors and generators
- IEEE standard test procedure for thermal evaluation of liquid-immersed distribution and power transformers
- IEEE standard test procedures and bases for Geiger-Mueller counters
- IEEE standard test specifications for surge-protective devices for low-voltage AC power circuits
- IEEE standard testability method for embedded core-based integrated circuits
- IEEE standard tests for determining compatibility of cable-pulling lubricants with wire and cable
- IEEE standards for Local and Metropolitan Area Networks : supplement to Standard for Interoperable LAN/MAN Security (SILS) : Security architecure framework
- IEEE standards for local and metropolitan area networks : integrated services (IS) LAN interface at the medium access control (MAC) and physical (PHY) layers
- IEEE standards for local and metropolitan area networks : supplement to Standard for interoperable LAN/MAN security (SILS)--Key management(Clause 3)
- IEEE standards for local and metropolitan area networks : supplement to distributed queue dual bus (DQDB) access method and physical layer specifications : connection-oriented service on a distributed queue dual bus (DQDB subnetwork of a metropolitan area network (MAN)
- IEEE standards for local and metropolitan area networks : supplement to integrated services (IS) LAN interface at the medium access control (MAC) and physical (PHY) layers : managed object conformance statement (MOCS) proforma
- IEEE standards for local and metropolitan area networks : supplement to integrated services (IS) LAN interface at the medium access control (MAC) and physical (PHY) layers : protocol implementation conformance statement (PICS) proforma
- IEEE standards for local and metropolitan area networks : supplement to integrated services (IS) LAN interface at the medium access control (MAC) and physical (PHY) layers : specification of ISLAN16-T
- IEEE standards for local and metropolitan area networks : supplement to standard for interoperable LAN/MAN security (SILS) : secure data exchange (SDE)--security label (Annexes 21, 2J, and 2K)
- IEEE standards for local and metropolitan area networks : virtual bridged local area networks
- IEEE standards for local and metropolitan area networks : virtual bridged local area networks--amendment 3 : multiple spanning trees
- IEEE test standard for expulsion fuses in enclosures : supplement to IEEE standard design tests for high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories
- IEEE trial-use guide for accelerated aging tests for medium-voltage extruded electric power cables using water-filled tanks
- IEEE trial-use guide for electric power distribution reliability indices
- IEEE trial-use guide for the detection of acoustic emissions from partial discharges in oil-immersed power transformers
- IEEE trial-use guide to the measurement of partial discharges in rotating machinery
- IEEE trial-use recommended practice for digital rights expression languages (DRELs) suitable for eLearning technologies
- IEEE trial-use recommended practice for multi-vendor access point interoperability via an inter-access point protocol across distribution systems supporting IEEE 802.11 operation
- IEEE trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions
- IEEE trial-use standard for Automatic Test Markup Language (ATML) for exchanging automatic test equipment and test information via XML : exchanging instrument descriptions
- IEEE trial-use standard for Automatic Test Markup Language (ATML) for exchanging automatic test information via XML : exchanging test station information
- IEEE trial-use standard for Automatic Test Markup Language (ATML) for exchanging automatic test information via eXtensible Markup Language (XML) : exchanging test configuration information
- IEEE trial-use standard for a broad-based environment for test (ABBET) : overview and architecture
- IEEE trial-use standard for measurement of video jitter and wander
- IEEE trial-use standard for message set template for intelligent transportation systems
- IEEE trial-use standard for prefixes for binary multiples
- IEEE trial-use standard for software interface for maintenance information collection and analysis (SIMICA) : exchanging test results and session information via the eXtensible Markup Language
- IEEE trial-use standard for testability and diagnosability characteristics and metrics
- IEEE trial-use standard for wireless access in vehicular environments (WAVE) : multi-channel operation
- IEEE trial-use standard for wireless access in vehicular environments (WAVE) : networking services
- IEEE trial-use standard for wireless access in vehicular environments (WAVE)--resource manager
- IEEE trial-use standard for wireless access in vehicular environments : security services for applications and management messages
- IEEE trial-use standard general requirements and test code for dry-type and oil-immersed smoothing reactors for DC power transmission
- IEEE trial-use standard general requirements and test code for oil-immersed HVDC converter transformers
- Implementation note for IEEE adoption of ISO/IEC 14143-1:1998 : information technology-- software measurement-- functional size measurement-- part 1: definition of concepts
- Information technology : Portable Operating System Interface (POSIX) : test methods for measuring conformance to POSIX, Part 1, System interfaces
- Information technology : Portable Operating System Interface (POSIX), Part 1 | Amendment 1, System interfaces | Realtime extension (C Language)
- Information technology : microprocessor systems -- high-performance synchronous 32-bit bus : MULTIBUS II
- Information technology : microprocessor systems : control and status registers (CSR) Architecture for microcomputer buses
- Information technology : software life cycle processes--risk management
- Information technology : telecommunications and information exchange between systems-- local and metropolitan area networks-- specific requirements, Part 17, Resilient packet ring (RPR) access method and physical layer specifications
- Information technology : telecommunications and information exchange between systems--local and metropolitan area networks, Part 5, Token ring access method and physical layer specifications--corrigendum 1
- Information technology : telecommunications and information exchange between systems--local and metropolitan area networks--specific requirements : amendment to carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications : aggregation of multiple link segments
- Information technology : telecommunications and information exchange between systems--local and metropolitan area networks--specific requirements : amendment to part 5 : token ring access method and physical layer specifications