Technical reports
Resource Information
The form Technical reports represents a specific category or genre of resources found in Missouri University of Science & Technology Library.
The Resource
Technical reports
Resource Information
The form Technical reports represents a specific category or genre of resources found in Missouri University of Science & Technology Library.
- Label
- Technical reports
682 Items that are about the Form Technical reports
Context
Context of Technical reportsGenre of
No resources found
No enriched resources found
- 2016 North Atlantic right whale (Eubalaena glacialis) shipboard survey of the Great South Channel, Jeffreys Ledge, and Howell Swell
- 2017 bioenergy industry status report
- 2020 observer sea days by trip selection system
- A cognitive agent for spectrum monitoring and informed spectrum access
- A computational analysis of a shear punch test
- A computational study of laminate transparent armor impacted by FSP
- A conservation assessment and strategy for the Humboldt marten in California and Oregon
- A cost-effective field measurement protocol to support lidar-assisted carbon monitoring programs : implementing a prototype design at six different sites in the United States
- A discussion of possible causes of low failure rates in decentralized I/M programs
- A field guide for the identification of invasive plants in southern forests
- A heuristic evaluation of the Generalized Intelligent Framework for Tutoring (GIFT) authoring tools
- A human-automation interface model to guide automation of system functions : a way to achieve manning goals in new systems
- A low velocity 0.30-cal. gun system
- A perspective on the flammability, toxicity, and environmental safety distinctions between methanol and conventional fuels
- A practical guide to the open standards for unattended sensors (OSUS
- A preliminary examination of the repeatability of the heavy-duty transient dynamometer emission test
- A process for the development of rapid prototype light pipes
- A real-time audio tele-presence device for remote acoustic monitoring
- A report on applying EEGnet to discrimnate human state effects on task performance
- A report on the emission performance of the Army sponsored Ford stratified charge engine
- A report on the emission performance of the Ford stratified charge engine using the 1975 test procedure
- A report on the exhaust emissions from a turbocharged Volkswagen
- A report on the exhaust emissions of an Army M-151 1/4 ton truck using an exhaust catalyst
- A report on the exhaust emissions of the 1971 production version of the Army M-151 jeep
- A report on the implementation of smart grids in Mexico
- A research strategy for enhancing sustainable recreation and tourism on public lands
- A second evaluation of the Echlin retrofit emission control system
- A second evaluation of the Questor emission control system
- A study of one gasoline-fueled engine line comparing emission results between 1969 engines and 1979 engines on three test procedures : the heavy-duty transient engine test, the heavy-duty 9-mode engine test, and the light-duty truck chassis test
- A study of the effectiveness of mechanic training for vehicle emissions inspection and maintenance programs
- A summary of industry comments received on manganese fuel additive (MMT
- A survey on security isolation of virtualization, containers, and unikernels
- A track to twin roll dynamometer comparison of several different methods of vehicle velocity simulation
- ASA S3/SC1.4 TR-2014 sound exposure guidelines for fishes and sea turtles : a technical report prepared by ANSI-Accredited Standards Committee S3/SC1 and registered with ANSI
- Abdomen impact testing of the THOR-50M anthropomorphic test device
- Abundance and biomass of benthic macroinvertebrates in Lake Michigan in 2015, with a summary of temporal trends
- Accelerated exposure testing of Sundog Solar Technologies : cooperative research and development final report
- Accelerating Systems Integration Standards (ACCEL)
- Accelerating calculations of reaction dissipative particle dynamics in LAMMPS
- Acciona power plant hydrogen mitigation project
- Accounting for the tier 2 and heavy-duty 2005/2007 requirements in MOBILE6 : final report M6. EXH.004
- Accumulo/Hadoop, MongoDB, and Elasticsearch performance for semi-structured intrusion detection (IDS) data
- Acoustical warning devices as emergency warning systems
- Adams National Historical Park : trolley vehicle replacement selection analysis
- Adapting existing energy planning, simulation, and operational models for resilience analysis
- Adhesives : test method, group assignment, and categorization guide for high-loading-rate applications : preparation and testing of single lap joints
- Advanced composites for air and ground vehicles : final report
- Aerodynamic optimization of a supersonic bending body projectile by a vector-evaluated genetic algorithm
- Agent reasoning transparency : the influence of information level on automation-induced complacency
- Agroforestry : enhancing resiliency in U.S. agricultural landscapes under changing conditions
- Alternative compliance annual reporting
- American WAKE experimeNt (AWAKEN)
- An analysis of carbon monoxide emissions as a function of ambient temperature and vehicle parameters
- An automated energy detection algorithm based on consecutive mean excision
- An automated energy detection algorithm based on kurtosis-histogram excision
- An automated energy detection algorithm based on morphological and statistical processing techniques
- An automated energy detection algorithm based on morphological filter processing with a modified waterhsed transform
- An automated energy detection algorithm based on morphological filter processing with a semi-disk structure
- An evaluation of a 1975 prototype Chrysler passenger car
- An evaluation of a variable cam timing technique as a control method for oxides of nitrogen
- An evaluation of restorative maintenance on exhaust emissions from 1975/1976 in-use automobiles in California
- An evaluation of the Echlin retro-fit emission control system
- An evaluation of the Questor emission control system
- An evaluation of the emissions characteristics of the Esso well mixed thermal reactor
- An evaluation of the exhaust emissions from two vehicles equipped with compressed natural gas conversion kits
- An introduction to grid services : concepts, technical requirements, and provision from wind
- An investigation of future ambient diesel particulate levels occurring in large-scale urban areas
- An overview of behind-the-meter solar-plus-storage regulatory design : approaches and case studies to inform international applications
- An overview of distributed energy resource (DER) interconnection : current practices and emerging solutions
- Analysis of behind-armor debris fragments from physics-based simulations
- Analysis of historical non-destructive evaluation probability of detection data for railroad tank cars
- Analysis of hot/cold cycle requirements for heavy-duty vehicles
- Analysis of humidity effects on fuel economy in response to a GM request for CAFE adjustments
- Analysis of motor vehicle fuel tank-related fires
- Analysis of the cost and value of concentrating solar power in China
- Analysis of the emission inspection analyzers
- Application of high performance computing for simulations of n-dodecane jet spray with evaporation
- Application of hybrid along-track interferometry/displaced phase center antenna method for moving human target detection in forest environments
- Application of point precipitation frequency estimates to watersheds
- Applied robotics for installations and base operations : user perceptions of a driverless vehicle at Fort Bragg
- Approaches for integrating renewable energy technologies in oil and gas operations
- Army science planning and strategy meeting : the fog of cyber war
- Array effects in large wind farms : cooperative research and development final report
- Assessing consequential scenarios in a complex operational environment using agent-based simulation
- Assessing distributional impacts stemming from a methodological change in the multispecies fishery combined coverage monitoring program
- Assessing forest sustainability in the tropical islands of the United States
- Assessment of energy-efficient and model-based control
- Assessment of nontimber forest products in the United States under changing conditions
- Assessment of test cell humidity measurement and control
- Authoring tools and methods for adaptive training and education in support of the US Training and Education in Support of the US Army Learning Model : research outline
- Automated broken spike detection : phase I
- Average lifetime periods for light-duty trucks and heavy-duty vehicles
- Ballistic evaluation of 7056 aluminum
- Basic searching, interpolating, and curve-fitting algorithms in C++
- Basin-wide approaches to hydropower relicensing : case studies and considerations
- Behavioral observations of the Cape Sable seaside sparrow from an acoustic array
- Behind-the-meter solar accounting in renewable portfolio standards
- Best practices handbook for the collection and use of solar resource data for solar energy applications
- Biobased carbon fibers and thermosetting resins for use in DOD composites applications : SERDP WP-1758 final report
- Biological assessment of oil and gas development on the Little Missouri National Grassland
- Broadband Outdoor Radiometer Calibration (BORCAL) process for the Atmospheric Radiation Measurement (ARM) program
- Buckling testing and analysis of honeycomb sandwich panel arc segments of a full-scale fairing barrel
- CO/CO2 NDIR analyzer replacement
- California time-of-use (TOU) transition : effects on distributed wind and solar economic potential
- California's forest products industry and timber harvest, 2012
- Caroline Dormon : the South's exceptional forest conservationist and naturalist
- Characterization of exhaust emissions from methanol- and gasoline-fueled automobiles
- Characterization of medium- and heavy-duty vehicle operations from in-use data : an analysis of starts, soak time, and warm-up duration
- Characterization of the rolling resistance of aftermarket passenger car tires
- Chrysler baseline gas turbine vehicle tests (January 74 - October 74
- Clause-by-clause summary of requirements in IEEE standard 1547-2018
- Clayton dynamometer-to-road tire rolling resistance relationship
- Clean Cities annual metrics report
- Clean Cities coalitions ... activity report
- Clean cities coalitions : 2017 activity report
- Clean energy integration in natural gas compressor station Operations
- Climate change vulnerability and adaptation in southwest Washington
- Climate change vulnerability and adaptation in the Intermountain Region
- Climate change vulnerability and adaptation in the northern Rocky Mountains
- Climate change vulnerability assessment for the Chugach National Forest and the Kenai Peninsula
- Climate change vulnerability assessment of aquatic and terrestrial ecosystems in the U.S. Forest Service Rocky Mountain Region
- Climate scenarios and projections : a technical document supporting the USDA Forest Service 2020 RPA Assessment
- Climatological data option in My weather impacts decision aid (MyWIDA) overview
- Coastal Alaska's forest resources, 2004-2013 : ten-year forest inventory and analysis report
- Collaboration to enable higher penetrations of solar power generation using the natural gas pipeline system for energy storage : cooperative research and development final report
- Collected notes on the basics of pressure-equipped inverted echo sounder (PIES) analysis
- Collecting and processing multistate criminal-history data for statistical analysis
- Common native forbs of the northern Great Basin important for greater sage-grouse
- Community choice aggregation : challenges, opportunities, and impacts on renewable energy markets
- Comparative analysis of GM inertia weight distributions MY75-MY81
- Comparative life-cycle assessment of biochar activated carbon and synthesis gas electricity with commercially available alternatives
- Comparative studies of the catch loss of longfin inshore squid when using the TI cable grid in the bottom trawl fishery
- Comparison of fuel economy values from the preconditioning and measuring cycles of the highway fuel economy test procedure
- Comparison of hot to cold tire : fuel economy
- Comparison of on-board diagnostics to tailpipe I/M : draft
- Compartment fire testing of a two-story mass timber building
- Compliance testing for locomotive LED headlights and auxiliary lights
- Compression-after-impact and bend fatigue results of glass/epoxy composites with compliant interlayer and needling inerlaminar enhancements
- Computational fluid dynamic (CFD) study of an articulating turbine blade cascade
- Computational investigation of a pitch-oscillating canard on lift enhancement and tip vortex mitigation
- Computer simulation of tire slip on a Clayton twin roll dynamometer
- Connected communities : a multi-building energy management approach
- Considerations for explosively driven conical shock tube designs : computations and experiments
- Consolidated guidance about materials licenses : program-specific guidance about academic, research and development, and other licenses of limited scope, including electron capture devices devices and x-ray fluorescence analyzers : final report
- Consolidated guidance about materials licenses: program-specific guidance about well logging, tracer, and field flood study licenses : final report
- Corrections for variations in test fuel properties
- Cost and feasibility of the temporary total enclosure method for determining capture efficiency
- Cost modelling for energy efficient window replacements
- Creating photographic loading sequences in the field for the photoload sampling technique
- Credit allocations for acquiring alternative fuel vehicles
- Credits for commercially available light-duty plug-in hybrid electric vehicles
- Credits for investments in alternative fuel infrastructure, alternative fuel non-road equipment, and emerging technologies
- Criteria for development of evacuation time estimate studies
- Critical examination of the article Impulse noise injury prediction based on the cochlear energy by Zagadou, Chan, Ho, and Shelly
- Critical loads of sulfur and nitrogen and modeled effects of deposition reduction for forested ecosystems of Great Smoky Mountains National Park
- Cross-border energy trade between Nepal and India : assessment of trading opportunities
- Cross-border energy trade between Nepal and India : trends in supply and demand
- Cross-border power trade to support resilience
- Cross-boundary wildfire and community exposure : a framework and application in the western U.S.
- Crystalline silicon photovoltaic module manufacturing costs and sustainable pricing : 1h 2018 benchmark and cost reduction road map
- Cuba, Puerto Rico, and climate change : shared challenges in agriculture, forestry, and opportunities for collaboration
- DNV GL joint industry project on coupled analysis of floating wind turbines : cooperative research and development final report
- DNV GL joint industry project on validation of turbulence models : cooperative research and development final report
- Data translations to support the Battlespace Terrain Ownership Project
- Defining the United States land base : a technical document supporting the USDA Forest Service 2020 RPA assessment
- Definition of the IEA 15-megawatt offshore reference wind
- Design and evaluation of an electromechanical actuator for projectile guidance
- Designing for compressive sensing : compressive art, camouflage, fonts, and quick response codes
- Detection of metallic and electronic radar targets by acoustic modulation of electromagnetic waves
- Developing a monitoring program for bird populations in the Chiricahua Mountains, Arizona, using citizen observers : initial stages
- Developing effective adaptive missile crews and command and control teams for air and missile defense systems
- Development of an anatomically accurate finite element human ocular globe model for blast-related fluid-structure interaction studies
- Development of heavy-duty NOx off-cycle emission effects for MOBILE6 : M6.HDE.003
- Development of input data layers for the FARSITE fire growth model for the Selway-Bitterroot Wilderness complex, USA
- Development of speed correction cycles : M6.SPD.001 : response to comments, corrections and clarifications
- Diesel hydrocarbon measurement : series filter test
- Differing ponderosa pine forest structures, their growth and yield, and mountain pine beetle impacts : growing stock levels in the Black Hills
- Disturbance and sustainability in forests of the western United States
- Domain-level assessment of the Weather Running Estimate-Nowcast (WRE-N) model
- Doppler processing with ultra-wideband (UWB) radar revisited
- Downward trend in passenger car fuel economy : a view of recent data
- Draft EPA recommended practice for naming I/M calibration gas
- Draft recommended practice for measurement of gaseous and particulate emissions from heavy-duty diesel engines under transient conditions
- Durability demonstration of systems for control of sulfuric acid
- Durability of oxygen sensors
- EPA evaluation of the FUEL-MAX Device under Section 511 of the Motor Vehicle Information and Cost Savings Act
- EPA evaluation of the P.A.S.S. KIT Device under section 511 of the Motor Vehicle Information and Cost Savings Act
- Economic profile for American lobster (Homarus Americanus) fleets in the northeastern United States
- Effect of altitude on non-controlled evaporative emissions from gasoline-fueled vehicles
- Effect of low cost repairs on I/M failed vehicles
- Effectiveness evaluation tools and methods for adaptive training and education in support of the US Army Learning Model : research outline
- Effects of fire and restoration on habitats and populations of western hummingbirds : a literature review
- Effects of gasoline volatility on the hydrocarbon exhaust emissions from a 1984 Oldsmobile Cutlass
- Effects of growth conditions on the measured electrical properties of monolayer molybdenum disulfide
- Electric vehicle supply equipment Tiger Team site assessment findings from Army facilities
- Electrification futures study : scenarios of power system evolution and infrastructure development for the United States
- Electronic Technical Information Center
- Elemental atmospheric pollution assessment via moss-based measurements in Portland, Oregon
- Emission control technology distribution used in MOBILE6 : M6.FLT.008a
- Emission report on the Tsurumi Trading Co. manifold
- Emission results from a Texaco catalyst concept applied to a previously uncontrolled engine
- Emission-related maintenance intervals for light-duty trucks and heavy-duty engines
- Emissions and fuel economy tests of the University of Florida hybrid bus
- Emissions from a Mercedes-Benz diesel car equipped with a turbocharger
- Emissions from the Worcester Polytechnical Institute (WPI) hybrid
- Emissions from the methanol fueled Stanford University Gremlim
- Emissions reductions from inspection and maintenance : Vancouver versus Portland snapshot
- Emissions, fuel economy, and performance of light-duty CNG and dual-fuel vehicles
- End-use load profiles for the U.S. building stock : market needs, use cases, and data gaps
- Energy performance validation of a gaseous air cleaning technology for commercial buildings
- Energy resilience assessment methodology
- Energy star® for tenants : an online energy estimation tool for commercial office building tenants
- Engineered wood fuels for Southeast Alaska : local wood chips for thermal energy applications, and the specific case of Haines, Alaska
- Enhanced automatic train control braking algorithm research and development
- Environmental effects of postfire logging : an updated literature review and annotated bibliography
- Equilibrium shape of ferrofluid systems in the uniform external field
- Estimating benefits of inspection/maintenance programs for evaporative control systems : M6. IM.003
- Estimating the impact of residual value for electricity generation plants on capital recovery, levelized cost of energy, and cost to consumers
- Estimation of national forest visitor spending averages from National Visitor Use Monitoring : round 2
- Evaluating ecosystem services as management outcomes in national forest and grassland planning assessments
- Evaluating otolith growth patterns to discriminate among subpopulations of Northwest Atlantic cod (Gadus morhua) : applicability of a new model to NEFSC bottom trawl survey samples
- Evaluating the use of drones for timber bridge inspection
- Evaluating utility-scale PV-battery hybrids in operational models for the bulk power system
- Evaluation of Dana Retronox EGR and UOP oxidizing catalyst retrofits on two medium duty vehicles
- Evaluation of Eccono-Needles
- Evaluation of HC control strategies for general aviation piston engines
- Evaluation of NASA thermal reactor
- Evaluation of Sta-Power fuel additive
- Evaluation of Stargas fuel additive
- Evaluation of Technol G, a fuel additive
- Evaluation of Vor-Air device, a retrofit EGR system
- Evaluation of a Chrysler lean burn vehicle
- Evaluation of a GM 1976 prototype vehicle - a catalytic exhaust manifold system
- Evaluation of a dual-chamber, spark-ignition, two-stroke engine
- Evaluation of a methanol-fueled (M85) turbocharged Nissan Sentra
- Evaluation of a proposed Colorado state inspection/maintenance program
- Evaluation of a resistively heated conductive ceramic fiber diesel particulate filter
- Evaluation of aircraft smoke standards for the criterion of invisibility
- Evaluation of an Emitec resistively heated metal monolith catalytic converter on two M100 neat methanol fueled vehicles
- Evaluation of applicability of the INCOLL procedure as an I/M strategy
- Evaluation of augmented reality sandtable (ARES) during sand table construction
- Evaluation of restorative maintenance retesting of passenger cars in Detroit
- Evaluation of specialized catalysts for methanol (M100) vehicles
- Evaluation of the Air-Jet device - air bleed
- Evaluation of the Beckman 951A atmospheric NOx analyzer
- Evaluation of the Berg emission control system
- Evaluation of the Ethyl Lean Reactor System applied to a Dodge Coronet
- Evaluation of the Extractor device
- Evaluation of the MSU 4-cylinder conversion technique for V-8 engines
- Evaluation of the Magna Flash ignition control system on a 1971 Vega
- Evaluation of the Moleculetor Fuel Energizer under Section 511 of the Motor Vehicle Information and Cost Savings Act
- Evaluation of the New York State dual-catalyst vehicle
- Evaluation of the Texaco Stratified Charge (TCP) M-151 army vehicle
- Evaluation of the emission reduction with the Perfect Circle Retronox speed controlled EGR system
- Evaluation of the feasibility of liquid fillneck seals
- Evaluation of three catalysts formulated for methane oxidation on a CNG-fueled pickup truck
- Evaluation of two consumers power company vehicles converted to use CNG fuel
- Evaluation of visualization tools for computer network defense analysts : display design, methods, and results for a user study
- Evaluation of wood species and preservatives for use in Wisconsin highway sign posts
- Ex situ catalytic fast pyrolysis of lignocellulosic biomass to hydrocarbon fuels : 2019 state of technology and future research
- Examining the influence of heartbeat on expert marksman performance
- Example alternative compliance waiver application
- Exhaust emission analysis of two Wankel-powered cars furnished by the U.S. Army Tank/Automotive Command
- Exhaust emission from passenger automobiles equipped with Doughboy carburetors
- Exhaust emissions and fuel consumption of a heavy-duty diesel vehicle over various driving cycles : GMC Astro 95, 8V-71 NA
- Exhaust emissions and fuel consumption of a heavy-duty gasoline powered vehicle over various driving cycles : 361 cubic inch 1966 Ford F-600
- Exhaust emissions and fuel consumption of a heavy-duty gasoline powered vehicle over various driving cycles : 427 cubic inch 1977 California GMC 6500
- Exhaust emissions and fuel economy from a light-duty diesel vehicle running on diesel fuel and wide boiling range fuel
- Exhaust emissions and fuel economy from automobiles using alcohol/gasoline blends under high-altitude conditions
- Exhaust emissions and fuel economy of three prototype Honda motorcycles
- Exhaust emissions from 10 GSA Rebels and 10 GSA Falcons equipped with LPG conversion kits
- Exhaust emissions from a 1971 passenger car equipped with the "Paser Magnum Electronic Anti-pollution Engine Economizer"
- Exhaust emissions from a 25-passenger internal combustion engine powered gasoline fueled bus
- Exhaust emissions from a 25-passenger organic Rankine cycle bus
- Exhaust emissions from a 53-passenger Lear Rankine cycle steam bus
- Exhaust emissions from a diesel-powered Nissan passenger car
- Exhaust emissions from a passenger automobile equipped with electronic fuel injection
- Exhaust emissions from a passenger car equipped with "Brisko's Heavy Duty PCV Valve"
- Exhaust emissions from a passenger car equipped with a Dupont exhaust emission control system using 1975 test procedure
- Exhaust emissions from a passenger car equipped with a Universal Oil Products catalytic converter
- Exhaust emissions from a passenger car equipped with the "Biap Electronic Ignition Unit"
- Exhaust emissions from a passenger car equipped with the "Paser Magnum electronic anti-pollution engine economizer"
- Exhaust emissions from a passenger car equipped with the "Wilford Smog Suppressor"
- Exhaust emissions from a passenger car powered by Marvel-Schebler LPG conversion
- Exhaust emissions from a passenger car with gasoline treated with Bycosin fuel additive
- Exhaust emissions from a reactor equipped, full-sized automobile using LPG fuel
- Exhaust emissions from a vehicle equipped with the Roberts induction modification supplied under contract CPA 70-51
- Exhaust emissions from a vehicle retrofitted with the Monocar HC control system
- Exhaust emissions from an Army M-151 equipped with a Mitsui catalyst
- Exhaust emissions from controlled and uncontrolled vehicles using the "Pollution Master" emission control device
- Exhaust emissions from four General Motors low emission prototype vehicles
- Exhaust emissions from seven LP gas powered vehicles
- Exhaust emissions from the Auto-Mate Research Chevrolet
- Exhaust emissions from the LaForce Falcon
- Exhaust emissions from three low-emission vehicles using catalytic converters
- Exhaust emissions from two General Motors steam cars
- Exhaust emissions from two passenger vehicles equipped with "Fumcell"
- Exhaust emissions from two passenger vehicles equipped with the ADAKS device
- Exhaust emissions on an uncontrolled passenger car using variable cam timing
- Existing and potential corporate off-site renewable procurement in the southeast
- Existing vegetation classification, mapping, and inventory technical guide
- Expanding community shared solar in New York City : analysis of barriers and policy pathways
- Experimental forests and ranges : 100 years of research success stories
- Experimental treatments for increasing perennial grass cover in a shrub-invaded grassland in the Southwestern Borderlands Region of Arizona and New Mexico
- FERC hydropower licensing : a review of utilization of the ILP, TLP, and ALP
- FPGAs and HPC
- Fabrication of high-strength lightweight metals for armor and structural applications : large-scale equal channel angular extrusion processing of aluminum 5083 alloy
- Family forest ownerships of the United States, 2018 : results from the USDA Forest Service, National Woodland Owner Survey : a technical document supporting the USDA Forest Service 2020 RPA Assessment
- Feasibility of mapping and marking underground utilities by state transportation departments
- Fens and their rare plants in the Beartooth Mountains, Shoshone National Forest, Wyoming
- Field guide to fishes commonly taken in longline operations in the western North Atlantic Ocean
- Field-induced texturing of ceramic materials for unparalleled properties
- Final report : exhaust emissions from a Mercedes-Benz diesel sedan
- Final report of Red Hake Stock Structure Working Group
- Final report of the Small Business Advocacy Review Panel on control of emissions from nonroad large spark ignition engines, recreational engines (marine and land-based), and highway motorcycles : July 17, 2001
- Final report on the study of diesel particulate traps at low mileage
- Fire in the southern Appalachians : understanding impacts, interventions, and future fire events
- Fire patterns in piñon and juniper land cover types in the semiarid western United States from 1984 through 2013
- Flexure strength and optical transparency of magnesium-aluminate spinel (MgAlO4 : influence of polishing and glass coating
- Forest Products Laboratory contributions to the use of Weibull distribution in wood engineering
- Forests of the Tanana Valley State Forest and Tetlin National Wildlife Refuge, Alaska : results of the 2014 pilot inventory
- Foundations of an electric mobility strategy for the city of Mexicali
- Framework for Springs Stewardship Program and proposed action development : Spring Mountains National Recreation Area, Humboldt-Toiyabe National Forest
- Frequency-domain characterization of optic flow and vision-based ocellar sensing for rotational motion
- From modules to atoms : techniques and characterization for identifying and understanding device-level photovoltaic degradation mechanisms
- Fuel Characteristic Classification System (FCCS) field sampling and fuelbed development guide
- Fuel consumption measurements - carbon balance vs flow meter
- Fuel economy effects of tires
- Fuel oxygen effects on exhaust CO emissions : recommendations for MOBILE6
- Gallium nitride (GaN) monolithic microwave integrated circuit (MMMIC) designs submitted to Air Force Research Laboratory (AFRL)-sponsored Qorvo fabrication
- Gallium nitride monolithic microwave integrated circuit using 0.25-æm Qorvo process
- Gap formations in simulations of SHPB tests on elastic materials soft in shear
- Gaps in available data for modeling tree biomass in the United States
- Gasohol test program
- Gasoline equivalent fuel economy determination for alternate automotive fuels
- GeoVision analysis supporting task force report: barriers : an analysis of non-technical barriers to geothermal deployment and potential improvement scenarios
- GeoVision analysis supporting task force report: impacts : the employment opportunities, water impacts, emission reductions, and air quality improvements of achieving high penetrations of geothermal power in the United States
- Geothermal deep direct use for turbine inlet cooling in east Texas
- Global stability and dynamics of strongly nonlinear systems using Koopman operator theory
- Grassland, forest and riparian ecosystems on mixed-ownership federal lands adjacent to the Crow Indian Reservation : developing a protective shield for sustainability of the environment and culture from the impacts of climate-related disturbance
- Gravity and magnetic studies of the eastern Mojave Desert, California and Nevada
- Green readiness, response, and recovery : a collaborative synthesis
- Groundwater flow and water budget in the surficial and Floridan aquifer systems in east-central Florida
- Guidance on emergency repair and restoration vehicle exclusions
- Guide to identification of some sculpin (Cottidae) larvae from marine and brackish waters off Oregon and adjacent areas in the Northeast Pacific
- Guide to some trawl-caught marine fishes from Maine to Cape Hatteras, North Carolina
- Guide to the Distributed Energy Resources Cybersecurity Framework
- Guide to the Leptocephali (Elopiformes, Anguilliformes, and Notacanthiformes
- Guidelines for home energy professionals : standard work specifications (SWS) maintenance charter and procedures
- Gypsy moth larval necropsy guide
- Heavy-duty engine testing report : correlation testing of Caterpillar 3208 DIT
- Heavy-duty engine testing report : correlation testing of Cummins NTCC-400
- Heavy-duty engine testing report : correlation testing of GMC 5.7L/MVMA engine
- Heavy-duty engine testing report : correlation testing of Isuzu 5.79L/JAMA engine
- Heavy-duty engine testing report : correlation testing of Mack EM G-285
- Heavy-duty engine testing report : correlation testing of the European EMA Round Robin engine (Daimler-Benz OM 366 A)
- Heavy-duty vehicle emission conversion factors II : 1962-2000
- Heavy-duty vehicle emission conversion factors, 1962-1997
- Heterogeneous systems for information-variable environments (HIVE
- High resolution numerical simulations of primary atomization in diesel sprays with single component reference fuels
- High-speed/high-resolution imaging of fuel sprays from various injector nozzles for direct injection engines
- High-velocity impact of low-density projectiles on structural aluminum armor
- Highly accurate method for real-time active power reserve estimation for utility-scale photovoltaic power plants
- Historical comparison of capacity build decisions from the Regional Energy Deployment System (ReEDS) model
- Historical forest structure, composition, and spatial pattern in dry conifer forests of the western Blue Mountains, Oregon
- Historical perspective and contribution of U.S. researchers into the field of Self-propagating High-temperature Synthesis (SHS)/Combustion Synthesis (CS : personal reflections
- Holography : the next disruptive technology
- How climatic conditions, site, and soil characteristics affect tree growth and critical loads of nitrogen for northeastern tree species
- Humans and autonomy : implications of shared decision-making for military operations
- Hydrogen and fuel cells for data project meeting : workshop report
- Hydrologic modeling for flow-ecology science in the southeastern United States and Puerto Rico
- Hydrostatic compression of 2,4,6,8,10,12-hexanitrohexaaza-isowurtzitane (CL20) co-crystals
- IN2 final report : Ibis networks/WattIQ
- Identification, mitigation, and adaptation to salinization on working lands in the U.S. Southeast
- Identifying opportunities in the development of ceramic matrix composite (CMC) materials for armor applications
- Igniting research for outdoor recreation : linking science, policy, and action
- Impacts of price formation efforts considering high renewable penetration levels and system resource adequacy targets
- Improved understanding of moisture effects on outdoor wood-adhesive bondlines
- Improvement in power output for CNT polymer hybrid film and accompanying thermoelectric generator : Cooperative Research and Development final report
- Improving the NEFSC clam survey for Atlantic surfclams and ocean quahogs
- In-vitro synthesis of gold nanoclusters in neurons
- India 2030 wind and solar integration study : interim report
- Industry-prioritized research, technology transfer, and education needs and opportunities in residential construction
- Inertia and the power grid : a guide without the spin
- Influence of parameters of a reactive interatomic potential on the properties of saturated hydrocarbons
- Inherently low-emission vehicle program : estimated emission benefits and impact on high-occupancy vehicle lanes
- Initial screening of environmentally sustainable surface pretreatments for adhesive bonding applications
- Innovations in sensors and controls for building energy management : research and development opportunities report for emerging technologies
- Innovative strategies to reduce the costs of effective wildlife overpasses
- Innovative utility offerings at the distribution edge : case studies from around the globe
- Installing and executing information object analysis, intent, dissemination, and enhancement (IOAIDE) and its dependencies
- Installing sealants for long service life
- Installing the ARL Phrase Book Android application and configuring its dependencies
- Instructional management for adaptive training and education in support of the US Army Learning Model : research outline
- Instructions for installing digiBASE plug-in on a Terra Harvest controller
- Integration of large-scale renewable energy in the bulk power system : good practices from international experiences
- Interim report on Edde Dart
- International best practices for implementing and designing renewable portfolio standard (RPS) policies
- Investigation into hydrogen sulfide odor problem on a privately-owned, catalytic converter-equipped 1975 automobile
- Investigation of roller sliding in wind turbine gearbox high-speed-shaft bearings
- Investigation of the need for in-use dispensing rate limits and fuel nozzle geometry standardization
- Investigation of the requested alternate dynamometer power absorption for the Ford Fiesta
- Investigation of the requested alternate dynamometer power absorption for the Ford LTD
- Investigation of the requested alternate dynamometer power absorption for the Ford Mercury Marquis
- Investigation of the rolling resistance of fuel-efficient and high performance tires
- Iquitos solar energy integration study
- Jamaica transportation greenhouse gas reduction plan
- Jamaican domestic ethanol fuel feasibility and benefits analysis
- Keeping It Wild 2 : an updated interagency strategy to monitor trends in wilderness character across the National Wilderness Preservation System
- Large SI engine technologies and costs : draft final report
- Larval development of shallow water barnacles of the Carolinas (Cirripedia : Thoracica) with keys to naupliar stages
- Least-cost pathways for India's electric power sector
- Lessons from the Railroad Information Sharing Environment (RISE) pilot project
- Lichen elemental indicators for air pollution in eastern United States forests : a pilot study in the Upper Midwest
- Life cycle assessment and environmental building declaration for the design building at the University of Massachusetts
- Life-cycle cost and optimization of PV systems based on power duration curve with variable performance ratio and availability
- Light-duty automotive technology and fuel economy trends through 1993
- Light-duty diesel gaseous emissions measurement - comparison of dilution tunnel test results to certification cell test results
- Locomotive emergency response training
- M3 wave system modeling : cooperative research and development final report, CRADA number CRD-17-697
- MOBILE6 estimates of exhaust emissions for 1994-and-later light duty diesel cars and trucks : M6. EXH.001
- MOBILE6.1 particulate emission factor model technical description : draft, M6.PM.001
- Magneto-hydordynamic simulations of a magnetic flux compression generator using ALE3D
- Management opportunities and research priorities for Great Plains grasslands : outcome of the working sessions held during the Great Plains Grassland Summit: challenges and opportunities from north to south ; Denver, Colorado April 10-11, 2018
- Mapping the supply chain for room air conditioning compressors
- Marine flora and fauna of the Northeastern United States : Cirripedia, Arthropoda
- Marine flora and fauna of the Northeastern United States, Crustacea, Cumacea
- Marine flora and fauna of the Northeastern United States, Scleractinia
- Measured visual motion sensitivity at fixed contrast in the periphery and far periphery
- Meeting 2025 zero emission vehicle goals : an assessment of electric vehicle charging infrastructure in Maryland
- Methow and Columbia Rivers studies : summary of data collection, comparison of database structure and habitat protocols, and impact of additional PIT tag interrogation systems to survival estimates, 2008-2012
- Mobility data and models informing Smart Cities
- Model of energy storage circuit for isotope battery based on SiC Schottky diode
- Model of operation-and-maintenance costs for photovoltaic systems
- Modeling cyber-physical war-gaming
- Modeling of stability of electrostatic and magnetostatic systems
- Modeling optical absorption for heat-induced actuation of single-use microgrippers
- Modeling, simulation, and measurement of balanced antipodal Vivaldi (BAV) antennas for fully polarimetric forward-looking ground-penetrating radar (FLGPR) receive channels
- Modelling the value of networked, small-hydro generators for storage and dispatch capability on the grid
- Monitoring air quality in class I wilderness areas of the Northeastern United States using lichens and bryophytes
- Monitoring land surface phenology in near real time by using PhenoMap
- Morphological characterization of the frontal and parietal bones of the human skull
- Morphological comparisons of North American sea bass larvae (Pisces : Serranidae)
- Motor vehicle NOx inventories
- Multiflash x-ray with image detanglement for single image isolation
- Multispecies mesocarnivore monitoring : USDA Forest Service multiregional monitoring approach
- NREL comparison of absolute cavity pyrgeometers and pyrgeometers traceable to the World infrared Standard Group and the infrared integrating sphere, September 23-October 4, 2019
- NREL pyrheliometer comparisons, September 23 -October 4, 2019 (NPC-2019
- NREL's cyber-energy emulation platform for research and system visualization
- Nanostructured superhydrophobic surfaces for nanoeducation and science, technology, engineering, and mathematics (STEM) outreach
- National FIA plot intensification procedure report
- Natural range of variation for red fir and subalpine forests in northwestern California and southwestern Oregon
- Natural range of variation for yellow pine and mixed-conifer forests in the Sierra Nevada, southern Cascades, and Modoc and Inyo National Forests, California, USA
- Networked microgrid optimal design and operations tool : regulatory and business environment study
- Nevada Photo-Based Inventory Pilot (NPIP) resource estimates (2004-2005
- New England and northern New York forest ecosystem vulnerability assessment and synthesis : a report from the New England Climate Change Response Framework Project
- New approaches to distributed PV interconnection : implementation considerations for addressing emerging issues
- Next generation renewables and, separately, energy system transformation, and related topics
- Nonroad recreational vehicle technologies and costs : draft final report
- Northeastern California plateaus bioregion science synthesis
- Northwest Forest Plan - the first 20 years (1994-2013 : status and trend of marbled murrelet populations and nesting habitat
- Numeric computation of the radar cross section of in-flight projectiles
- Numerical modeling of buried mine explosions
- Ocean variability in the U.S. Fishery Conservation Zone, 1976
- Octane requirements of 1975 model year automobiles fueled with unleaded gasoline
- On-road heavy-duty low-NOx technology cost study
- OpenFlow extensions for programmable quantum networks
- Operational Characteristics Study : Columbus, Ohio Program
- Operational assessment of the black sea bass, scup, bluefish, and monkfish stocks, updated through 2018
- Opportunistic acoustic telemetry platforms : an update on the Northeast Fisheries Science Center's Collaborative Monitoring Program in the Gulf of Maine, 2005-2018
- Opportunistic hybrid communications systems for distributed PV coordination
- Opportunities for research and development of hybrid power plants
- Opportunities for solar industrial process heat in the United States
- Optical 3-way handshake (O3WHS) protocol simulation in OMNeT++
- Optimization of in-cylinder pressure filter for engine research
- Optimizing an integrated renewable-electrolysis system
- Options for resilient and flexible power systems in select South American economies
- Oregon's forest resources, 2006-2015 : ten-year forest inventory and analysis report
- Osteology, phylogeny, and higher classification of the fishes of the order Plectognathi (Tetraodontiformes
- Overview of I/M activities and issues
- Owning the environment : stealth soldier : research outline
- PV variability at the DeSoto Next Generation Solar Energy Center
- Paintball accuracy measurements
- Particulate measurement - dilution tunnel stabilization
- Particulate measurement - evaluation of the equivalency of the three-bag and four-bag LA-4 dynamometer test procedures
- Particulate measurement - light-duty diesel particulate baseline test results
- Particulate measurement - vehicle preconditioning
- Particulate measurement-efficiency of Pallflex T60A20 filter media
- Particulate measurement-motorcycle test results
- Passive monitoring techniques for evaluating atmospheric ozone and nitrogen exposure and deposition to California ecosystems
- Performance of photovoltaic systems recorded by open solar performance and reliability clearinghouse (oSPARC
- Peña station NEXT energy district master plan : cooperative research and development final report
- Phase I : evaluation of emissions, fuel economy, and low ambient temperature cold startability of an M100 Saab 900S with direct ignition
- Photovoltaic inverter reliability assessment
- Polymeric materials models in the Warrior Injury Assessment Manikin (WIAMan) anthropomorphic test device (ATD) tech demonstrator
- Postfire restoration framework for national forests in California
- Potential science and technology game changers for the ground warfare of 2050 : selected projections made in 2017
- Power spectral density and Hilbert transform
- Prediction of U.S. annual fuel consumption by passenger automobiles
- Preparing the U.S. Army for homeland security : concepts, issues, and options
- Proactive limber pine conservation strategy for the Greater Rocky Mountain National Park Area
- Producing a data dictionary from an extensible markup language (XML) schema in the Global Force Management Data Initiative
- Proof of concept investigation for the physical emission rate estimator (PERE) to be used in MOVES
- Protocol for social vulnerability assessment to support national forest planning and management : a technical manual for engaging the public to understand ecosystem service tradeoffs and drivers of change
- Prototype commuter rail seats in CEM passenger railcars
- Providing ramping service with wind to enhance power system operational flexibility
- Python scripts for automation of current-voltage testing of semiconductor devices (FY17
- Quality assurance in inspection/maintenance programs
- Quantal response : nonparametric modeling
- Quantifying the effects of dams on Atlantic salmon in the Penobscot River Watershed, with a focus on Weldon Dam
- Quantifying the role of state and private forest lands in providing surface drinking water supply for the southern United States
- Quantifying uncertainty from computational factors in simulations of a model ballistic system
- Quasi-static and dynamic characterization of equal channel angular extrusion (ECAE) - processed and rolled AZ31 magnesium alloy sheet
- R&D insights for extreme fast charging of medium- and heavy-duty vehicles : insights from the NREL Commercial Vehicles and Extreme Fast Charging Research Needs Workshop, August 27-28, 2019
- Railroad Information Sharing Environment (RISE)
- Railroad freight car remote controlled electrically driven set & release hand brake (EDHB) - wireless control development
- Range digitization support for the Flight Sciences Branch
- Rangeland water developments at springs : best practices for design, rehabilitation, and restoration
- Rangelands on the Edge : quantifying the modification, fragmentation, and future residential development of U.S. rangelands
- Ranking tires using a transient speed-time cycle
- Rapid development of disruptive photovoltaic technologies
- Recommendation on feasibility for onboard refueling loss control
- Recommendations for model-driven paradigms for integrated approaches to cyber defense
- Recommended practice for determining exhaust emissions from heavy-duty engines under transient conditions : draft
- Reducing PV performance uncertainty by accurately quantifying the PV resource
- Reducing hazards associated with visual and automation-aided track inspections
- Refrigerants : market trends and supply chain assessment
- Refueling emissions from uncontrolled vehicles
- Regenerative fuel cell system : cooperative research and development : final report
- Regional Energy Deployment System (ReEDS) model documentation : version 2018
- Regional Energy Deployment System (ReEDS) model documentation : version 2019
- Regional tectonics and seismicity of southwestern Iowa : final report,1978-1982.
- Regulatory foundations for cross-border electricity trading : Bangladesh
- Regulatory foundations for cross-border electricity trading : India
- Regulatory foundations for cross-border electricity trading : Nepal
- Regulatory impact analysis for the plywood and composite wood products NESHAP
- Report of the Small Business Advocacy Review Panel on emissions standards for new compression-ignition and spark-ignition recreational marine engines : August 25, 1999
- Requesting an exemption from standard compliance
- Restorative maintenance retesting of 1977 model year passenger cars in Denver
- Results of IEA Wind TCP workshop on a grand vision for wind energy technology
- Retro-fit emission control devices for pre-1968 vehicles
- Retrofit and full-scale testing of a state-of-the art end structure on a Budd M1 cab car
- Retrospective fire modeling : quantifying the impacts of fire suppression
- Revenue service evaluation of a truck component inspection system
- Revisions and further evaluations of the Right Whale Abundance Model : improvements for hypothesis testing
- Riparian ecosystems of the Salmon-Challis National Forest : an assessment of current conditions in relation to natural range of variability
- Riparian fuel treatments in the western USA : challenges and considerations
- Riparian research and management : past, present, future
- Safety evaluation of corner clearance at signalized intersections
- Safety evaluation of horizontal curve realignment on rural two-lane roads
- Safety evaluation of multiple strategies at signalized intersections
- Safety evaluation of multiple strategies at stop-controlled intersections
- Safety evaluation of pedestrian countdown signals
- Safety evaluation of profiled thermoplastic pavement markings
- Safety evaluation of turning movement restrictions at stop-controlled intersections
- Safety implications of onboard refueling vapor recovery systems : final report
- Sawmill towns : work, community life, and industrial development in the pineywoods of Louisiana and the New South
- Scalability of the CTH Shock Physics Code on the Cray XT
- Scalable electrolytic systems for renewable hydrogen production : cooperative research and development final report
- Science framework for conservation and restoration of the sagebrush biome : linking the Department of the Interior's integrated rangeland fire management strategy to long-term strategic conservation actions, Part 2, Management applications
- Secondary impact protection for locomotive engineers - improved airbag design
- Sector-specific methodologies for subnational energy modeling
- Seeing the forest below the trees : occurrences of shrubs in the Pacific Northwest
- Selection of transient cycles for heavy-duty vehicles
- Semi-automated processing of trajectory simulator output files for model evaluation
- Sensing applied load and damage effects in composites with nondestructive techniques
- Sensitivity analysis of MOBILE6.0
- Sensitivity of test cycle and fuel type on a Crusader 350 inboard marine engine : test results - 1992